Materials Science & Engineering

Publications

John Allison

William F. Hosford Collegiate Professor of Materials Science and Engineering

johnea@umich.edu

3018 H.H. Dow
T: (734) 615-5150

Bio

Publications

Group


  1. M. Yaghoobi, T. Berman, J. Allison, "Effects of Zn and Ca on the deformation texture evolution of Mg-Zn-Ca alloys at elevated temperatures", Journal of Materials Research and Technology, 35 (2025) 37-50.
  2. D. A. Greeley, J. F. Adams, P. Kneissi, J. W. Jones, A. D. Spear, J. E. Allison "Use of Multi-modal HEDM for characterization of fatigue crack paths in Mg WE43", Fatigue and Fracture of Engineering Materials and Structures, 47 (2024) 1150-1171.
  3. B Phung, D. Greeley, M. Yaghoobi, J. Adams, J. Allison, A. Spear, "Predicting microstructurally sensitive fatigue-crack path in WE43 magnesium using high-fidelity numerical modeling and three-dimensional experimental characterization", Fatigue and Fracture of Engineering Materials and Structures, 47,3 (2023) 862-883.
  4. Sangwon Lee, Tracy D. Berman, Can Yildirim, Carsten Detlefs, John E. Allison, Ashley Bucsek"Multiscale and multimodal characterization of recrystallized and non-recrystallized grains during static recrystallization in a hot-compressed Mg-3.2Zn-0.1Ca wt.% alloy" Scientific Reports, 14,1 (2023) 6241.
  5. K. Stopka, M. Yaghoobi, J. Allison, D. McDowell, “Microstructure-Sensitive Modeling of Surface Roughness and Notch Effects on Extreme Value Fatigue” International Journal of Fatigue, 166 (2023) 10725.
  6. A. Lakshmanan, M. Andani, M. Yaghoobi, J. Allison, A. Misra, V. Sundararaghavan, "A combined experimental and crystal plasticity study of grain size effects in magnesium alloys" Journal of Magnesium Alloys 11 (12) (2023) 4445-44
  7. Q. Shi, A. Natarajan, A. Van der Ven, J. Allison, “Segregation of Ca to precipitates in a Mg-rare earth alloy”, Materials Research Letters, 11 (2023) 222-230.
  8. Z. Chen, M. Yaghoobi, V. Sundararaghavan, J. Allison and S. Daly, “The Effects of Microstructure on Deformation Twinning in Mg WE43, MSEA, A 859 (2022) 114189.
  9. Mohammadreza Yaghoobi, Zhe Chen, Aeriel D. Murphy-Leonard, Veera Sundararaghavan, Samantha Daly, John E. Allison, “Deformation twinning and detwinning in extruded Mg-4Al: in-situ experiment and crystal plasticity simulation” International Journal of Plasticity, 155 (2022) 103345.
  10. Mohammadreza Yaghoobi, John Allison, Veera Sundararaghavan,” PRISMS-Plasticity TM: An open-source rapid texture evolution analysis pipeline”, IMMI, (2022) 1-18.
  11. Zhenjie Yao, David Montiel and John Allison, “Investigating the Effects of Dendrite Evolution on Microsegregation in Al-Cu Alloys by Coupling Experiments, Micro-Modeling, and Phase Field Simulations” Metallurgical and Materials Transactions A, V 53A (2022) 3341-3356.
  12. Zhenjie Yao, Yang Huo, Mei Li and John Allison, "A Quantitative Study of Microsegregation in Al-Cu Alloys", Metallurgical and Materials Transactions A, V 53A (2022) 2383-2401.
  13. Z. Chen, C. Torbet and J. Allison, “In-situ Characterization of Deformation Twinning in Magnesium during Cyclic Loading via Electron Backscatter Diffraction”, JOM (2022) pp 2577-2591.
  14. FC Liu, P Dong, AS Khan, K Sun, W Lu, A Taub, JE Allison, "Amorphous interfacial microstructure and high bonding strength in Al-Fe bimetallic components enabled by a large-area solid-state additive manufacturing technique," Journal of Materials Processing Technology 308 (2022) 117721.
  15. Reza Roumina, Sangwon Lee, Tracy D. Berman, Katherine S. Shanks, John E. Allison, Ashley Bucsek, “The dynamics of recrystallized grains during static recrystallization in Mg-Zn-Ca sheet alloy using in-situ far field high-energy diffraction microscopy” Acta Materialia 234 (2022) 118039.
  16. Tracy D Berman, Zhenjie Yao, Erin Deda, Larry Godlewski, Mei Li, John E Allison, " Measuring and Modeling Microsegregation in High-Pressure Die Cast Mg–Al Alloys", Metallurgical and Materials Transactions A, V 53A (2022) 2730-2742.
  17. M. Andani, A. Lakshmanan, V. Sundararaghavan, J. Allison, A. Misra, “Estimation of micro-Hall-Petch coefficients for prismatic slip in Mg-4Al as a function of grain boundary parameters”, Acta Materialia, 226, 2022, 117613.
  18. K. Stopka, M. Yaghoobi, J. Allison and D. McDowell, “Simulated effects of sample size and grain neighborhood on the modeling of extreme value fatigue response,” Acta Materialia, 224, 2022, 117524.
  19. K. Stopka, M. Yaghoobi, J. Allison and D. McDowell, “Effects of boundary conditions on microstructure-sensitive fatigue analysis” 10 (3) IMMI, 2021, 393-412.
  20. M. Yaghoobi, Z. Chen, V. Sundararaghavan, S. Daly, J. Allison, “Crystal plasticity finite element modeling of extension twinning in WE43 Mg alloys: calibration and validation”, IMMI, 10 (3) ,2021, p 488-507.
  21. T. Berman and J. Allison, “Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys”, JOM, 73, 5, 2021, 1450-1459.
  22. M. Yaghoobi, K. Stopka, A. Lakshmanan, V. Sundararaghavan, J. Allison, D. McDowell, “PRISMS-Fatigue computational framework for fatigue analysis in polycrystalline metals and alloys”, npj Computational Materials, 2021, 38.
  23. S. Ganesan, M. Yaghoobi, A. Githens, Z. Chen, S. Daly, J. Allison, V. Sundaraaraghavan, “The effects of heat treatment on the response of WE43 Mg alloy: crystal plasticity finite element simulation and SEM-DIC experiment”, International Journal of Plasticity, 137, 2021, 102917.
  24. Z. Huang, C. Yang, J. Allison, L. Qi, A. Misra, “Dislocation cross-slip in precipitation hardened Mg-Nd alloys”, Journal of Alloys and Compounds,  859, 2021, 157858.
  25. A. Zaitzeff, A. Pilchak, T. Berman, J. Allison, S. Esedoglu, “A robust algorithm to calculate parent beta grain shapes and orientations from alpha phase electron backscatter diffraction data in alpha/beta-titanium alloys”, Scripta Materialia, 191, 2021, 191-195.
  26. Z. Yao, T. Berman, J. Allison, “An ICME Method for Predicting Phase Dissolution During Solution Treatment in Advanced Super Vacuum Die Cast Magnesium Alloys”, Integrated Materials and Manufacturing Innovation, 9 (3), 2020, 201-213.
  27. Q. Shi, Y. Huo, T. Berman, B. Ghaffari, M. Li, J. Allison, “Distribution of Transition Metal Elements in an Al-Si-Cu-Based Alloys” Scripta Materialia, 190, 2021, 97-102.
  28. Moshen Taheri Andani, Aaditya Lakshmanan, Veera Sundararaghavan, John Allison, Amit Misra,” Quantitative study of the effect of grain boundary parameters on the slip system level Hall-Petch slope for basal slip system in Mg-4Al”, Acta Materialia, 200, 2020, 148-161.
  29. M. Yaghoobi, J.E. Allison, V. Sundararaghavan, “Multiscale modeling of twinning and detwinning behavior of HCP polycrystals” International Journal of Plasticity,127, 2020, 102653.
  30. A. Githens, S. Ganesan, Z. Chen, J. Allison, V. Sundararaghavan, S. Daly, “Characterizing Microscale Deformation Mechanisms and Macroscopic Tensile Properties of a High Strength Magnesium Rare-Earth Alloy: A Combined Experimental and Crystal Plasticity Approach”, in Acta Materialia, 186,  2020, 77-94.
  31. Qianying Shi, Bruce Williams and John Allison, “Microstructure Evolution and Precipitation Strengthening in Ca-Containing Mg-Rare Earth Alloys”, Magnesium Technology 2020, TMS, 2020,  25-30.
  32. Tracy Berman and John Allison, “Relating Texture and Thermomechanical Processing Variables in Mg-Zn-Ca Alloys”, Magnesium Technology 2020, TMS, 2020, 175-180.
  33. D. Greeley, M. Yaghoobi, D. Pagan, V. Sundararaghavan and J. Allison, “Using Synchrotron radiation to improve understanding of deformation of polycrystalline metals by measuring, modeling and publishing 4D information” Metal Microstructures in 2D, 3D and 4D, Riso International Symposium on Materials Science, IOP Series: Materials Science and Engineering, Technical University of Denmark, 580 (1) 012017, 2019.
  34. Moshen Taheri Andani, Aaditya Lakshmanan, Mohammadreza Karmooz-Raveri, Veera Sundararaghavan, John Allison, Amit Misra, “A quantitative study of stress fields ahead of a slip band blocked by a grain boundary in unalloyed magnesium”, Scientific Reports (Nature Research), 2020, 10:3084.
  35. Yakun Zhu, Kai Sun, Jacob Garves, Leslie G. Bland, Jenifer Locke, John Allison, G.S. Frankel, “Micro- and nano-scale intermetallic phases in AA2070-T8 and their corrosion behavior” Electrochimica Acta, 319, 2019, 634-648.
  36. Mohammadreza Yaghoobi, Sriram Ganesan, Srihari Sundar, Aaditya Lakshmanan, Shiva Rudraraju, John E. Allison, Veera Sundararaghavan, “PRISMS-Plasticity: An open-source crystal plasticity finite element software” Computational Materials Science, 169, 2019, 109078.
  37. Qianying Shi, Sinsar Hsie, Wayne Jones and John E. Allison, “Effects of alloying and processing on ultrasonic fatigue behavior in binary Ti-Al alloys” Materials Science and Engineering A, 756. 2019, 564-577.
  38. Qiaofu Zhang, Surendra K. Makineni, John E. Allison, Ji-Cheng Zhao, “Effective evaluation of interfacial energy by matching precipitate sizes measured along a composition gradient with Kampmann-Wagner numerical (KWN) model”, Scripta Materialia, 160, 2019, 70-74.
  39. Aeriel D. Murphy-Leonard, Darren C. Pagan, Armand Beaudoin, Matthew P. Miller, John E. Allison "Quantification of Twinning-Detwinning Behavior During Low-Cycle Fatigue of Pure Magnesium Using High Energy X-Ray Diffraction" International Journal of Fatigue, 125, 2019, 314-323. 
  40. Zhihua Huang, Chaoming Yang, Liang Qi, John E. Allison, Amit Misra, “Dislocation pile-ups at β1 precipitate interfaces in Mg-rare earth (RE) alloys” Materials Science and Engineering A, 742, 2019. 278-286.
  41. L. K. Aaegesen, J. F. Adams, J. E. Allison, B. Andrews, V. Araullo-Peters, T. Berman, Z. Chen, S. Daly, S. Das, S. DeWitt, S. Ganesan, K. Garikipati, V. Gavini, A. Githens, M. Hedstrom, Z. Huang, H.V. Jagadish, J.W. Jones, J. Luce, E.A. Marquis, A. Misra, D. Montiel, P. Motamarri, A. D. Murphy, A. R. Natarajan, S. Panwar, B. Puchala, L. Qi, S. Rudraraju, K. Sagiyama, E.L.S. Solomon, V. Sundararaghavan, G. Tarcea, G. H. Teichert, J. C. Thomas, K. Thornton, A. Van der Ven, Z. Wang, T. Weymouth, C. Yang. " PRISMS - An Integrated, Open Source Framework for Accelerating Predictive Structural Materials Science, JOM, Vol 70, No 10, pp 2298-2314, 2018. doi.org/10.1007/s11837-018-3079-6
  42. S. Panwar, J.F. Adams, J. E. Allison, J. W. Jones and V. Sundararaghavan, "A grain boundary interaction model for microstructurally short cracks", International Journal of Fatigue, Volume 113, pp 401-406, 2018.
  43. Aeriel D. Murphy and John E. Allison, "The Recrystallization Behavior of Unalloyed Mg and a Mg-Al Alloy," Metallurgical and Materials Transactions, Vol 49 (5) 1492-1508, 2018.
  44. L.K. Aagesen, J. Miao, J. E. Allison, S. Aubry, A. Arsenlis, "Prediction of Precipitation Strengthening in the Commercial Mg Alloy AZ91 Using Dislocation Dynamics", Metallurgical and Materials Trans., Vol 49 (5) pp. 1908- 1915, 2018.
  45. Zhihua Huang, John E. Allison and Amit Misra, "Interaction of Glide Dislocations with Extended Precipitates in Mg-Nd alloys", Scientific Reports of Nature Research, Scientific 8, Article number: 3570, 2018.
  46. R. Decker, S. LeBeau, D. LaCroix, S. Makiheni, J. Allison, “Development of BioMg® 250 Bioabsorbable Implant Alloy”,  in Magnesium Technology 2018, D. Orlov, V. Joshi, K. Solanki, N. Neelameggham, (eds) 2018. The Minerals, Metals & Materials Society.
  47. S. DeWitt, E. Solomon, A. Natarajahn, V. Araullo-Peters, S. Rudraraju, L. Aagesen, B.  Puchala, E. Marquis, A Van der Ven, K. Thornton, J. Allison, "Misfit-driven beta''' precipitate composition and morphology in Mg-Nd Alloys", Acta Materialia, 136, 378-389, 2017.
  48. P. Panagos, Y. Wang, D.G. McCartney, M. Li , B. Ghaffari , J.W. Zindel , J. Miao , S. Makineni , J.E. Allison , O. Shebanova , J.D. Robson , Peter D. Lee, "Characterising precipitate evolution in multi-component cast aluminium alloys using small-angle X-ray scattering", Journal of Alloy and Compounds, 703, 344-353, 2017.
  49. Erin Deda, Tracy Berman, John Allison, "The Influence of Al Content and Thickness on the Microstructure and Tensile Properties in High Pressure Die Cast Magnesium Alloys" Metallurgical and Materials Transactions, 48A, 2000-2014, 2017
  50. Tracy D. Berman, Mei Li and John E. Allison, "Microsegregation in High Pressure Die Cast Mg Alloys", Magnesium Technologies, K. N. Solanki et al (eds.), TMS, 73-78, 2017.
  51. B. Puchala, G. Tarcea, E. A. Marquis, M. Hedstrom, H. V. Jagadish and J. E. Allison, “The Materials Commons: A collaboration platform and information repository for the global materials community”, JOM, 68, 2035-44, 2016.
  52. J.  Adams, J. Allison, J. W. Jones, “The effects of heat treatment on very high cycle fatigue behavior in hot-rolled WE43 magnesium” International Journal of Fatigue, 93 (2) 372-386, 2016.
  53. E. Solomon, V. Araullo-Peters, J.E. Allison, E.A. Marquis, "Early precipitate morphologies in a Mg-Nd-(Zr) Alloys," Scripta Materialia, 128;14-17, 2017.
  54. Joy H. Forsmark, Jacob W. Zindel, Larry Godlewski, Jiang Zheng, John E. Allison, Mei Li, "Using Quality Mapping to Predict Spatial Variation in Local Properties and Component Performance in Mg alloy Thin-walled High-pressure Die Dastings: An ICME Approach and Case Study" Integrating Materials and Manufacturing Innovation, (4:6) 2015.
  55. Erin Deda and John Allison, “Influence of processing on the microstructure and tensile behavior of HPDC AM50”, Magnesium Technology, TMS Warrendale, MI, 2015.
  56. Tracy Berman, E. Deda, J. Miao, M. Li, J. Allison, “Microsegregation in High Pressure Die Cast AM70”, Magnesium Technology, TMS Warrendale, MI, 2015.
  57. Xianfeng Ma, Zhihua Huang, M. Li and J. Allison,  “Recrystallization Behavior of the Magnesium Alloy ZE20”, Magnesium Technology, TMS Warrendale, MI, 2015.
  58. Anna Trump and John Allison, “The Influence of Aluminum Concentration on Static Recrystallization in Alpha Titanium alloys” International Titanium Congress, TMS, Warrendale, PA, 2015
  59. Larry A. Godlewski, Xuming Su, Tresa M. Pollock and John E. Allison, "The Effect of Aging on the Relaxation of Residual Stress in Cast Aluminum", Metallurgical and Materials Transactions, Vol 44A, 4809-4818, 2013.
  60. K. S. Choi, D. Li, X. Sun, M. Li and J. Allison, "Effects of Pore Distributions on Ductility of Thin-Walled High Pressure Die-Cast Magnesium" SAE Paper 2013-01-0644, SAE Inc., Warrendale, PA, 2013.
  61. “A Hybrid Kinetic Evolution Model for Mg17Al12 Precipitates in AZ91” Junsheng Wang, Mei Li, Bita Ghaffari, Long-Qing Chen, Jiashi Miao, John Allison, in Proceedings of Magnesium 2012, Vancouver, BC, Canada, 2012. 
  62. “Microstructural Evolution During Heat Treatment of Super Vacuum Die Cast AZ 91” Jiashi Miao, Mei Li, John Allison, in Proceedings of Magnesium 2012, Vancouver, BC, Canada, 2012. 
  63. “Integrated Computational Materials Engineering: A Perspective on Progress and Future Steps”, John Allison, JOM, The Mineral, Metals and Materials Society, Warrendale, PA April 2011, p 15.
  64. “Strain-induced Texture Development in the Magnesium Alloy AZ31”, Shiyao Huang, Dayong Li, Yinghong Peng, Andy Drews, Jon Hangas, Mei Li and John Allison in Advances in X-Ray Analysis, 2011.
  65. “Development of thermal boundary condition model at metal/die interface of high pressure die casting process” , Z.-P. Guo, S.-M. Xiong, B. C. Liu, M. Li and J. Allison, International Journal of Cast Metals Research, Vol 24, No. 3, 2011, p 150.
  66. "Multiscale Modeling of the Influence of Fe Content in a Al–Si–Cu Alloy on the Size Distribution of Intermetallic Phases and Micropores", Junsheng Wang, Mei Li, John Allison, and Peter D. Lee, Journal of Applied Physics, 107 (061804) 2010.
  67. "Phase-field Study on the Influence of Solute Interactions on Solidification Processes in Multicomponent Alloys" Ruijie Zhang, Mei Li and John Allison, Computational Materials Science 47 (2010) pp. 832–838.
  68. "Integrated Computational Materials Engineering for Magnesium in Automotive Body Applications", John E. Allison, Baicheng Liu, Kevin Boyle, Lou Hector, Robert McCune, in Magnesium Technology, Proceedings of 2010 TMS Symposia, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2010. 
  69. "Modeling Casting and Heat Treatment Effects on Microstructure in Super Vacuum Die Casting (SVDC) AZ91 Magnesium Alloy", Mei Li, Ruijie Zhang and John Allison, Numerical Simulation of Flow-Induced Air Entrapment Defects in the High Pressure Die Casting Process," in Magnesium Technology, Proceedings of 2010 TMS Symposia, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2010. 
  70. "Numerical Simulation of Flow-Induced Air Entrapment Defects in the High Pressure Die Casting Process," Shuai-Jun Li, Shou-Mei Xiong, Bai-Cheng Liu, Mei Li and John Allison, in Magnesium Technology, Proceedings of 2010 TMS Symposia, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2010. 
  71. "In-Situ Observation of Tensile Deformation of High-Pressure Die-cast Specimens of AM50 Alloy", Jie Song, Shou-Mei Xiong, Mei Li, John Allison, Materials Science and Engineering: A, Volume 520, Issue 1-2, 2009, pp. 197-201.
  72. “The Kinetics of Fe-Rich Intermetallic Formation in Aluminium Alloys: In-Situ Observation”, J. S. Wang,  P. D. Lee, R. W. Hamilton, M. Li, and J. E. Allison, Scripta Mat., 60 (7), (2009) pp. 516-9.
  73. "Residual Stress Analysis of Air–Quenched Engine Aluminum Cylinder Heads" Xuming Su, John Lasecki, James Jan, Carlos Engler-Pinto Jr. and John Allison, SAE International Journal of Engines April 2009 1:1015-1019 (also as SAE Paper 2008-01-1420), SAE Inc., Warrendale, PA, 2009.
  74.  "Numerical Analysis of Thermal Growth of Cast Aluminum Engine Components" Xingfu Chen, Xuming Su, Peter Gustafson and John Allison, SAE Paper 2008-01-1419, SAE Inc., Warrendale, PA, 2008.
  75. "Effect of Frequency, Environment and Temperature on Fatigue Behavior of E319 Cast Aluminum Alloy: Small Crack Propagation" X. Zhu, J. W. Jones, J. E. Allison, Metallurgical and Materials Transactions, Vol 39A, 2008, pp. 2666-2680.
  76. "Effect of Frequency, Environment and Temperature on Fatigue Behavior of E319 Cast Aluminum Alloy: Stress Controlled Fatigue Life Response" X. Zhu, J. W. Jones, J. E. Allison. Metallurgical and Materials Transactions, Vol 39A, 2008, p. 2681.
  77. "Fatigue Crack Propagation in E319 Cast Aluminum Alloy at Ultrasonic and Conventional Frequencies" Xiaoxia Zhu, J. Wayne Jones, John E. Allison, in TMS 08 Collected Proceedings: Hael Mughrabi Honorary Symposium, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2008.
  78. "Effect of Process Parameters, Casting Thickness, and Alloys on the Interfacial Heat-Transfer Coefficient in the High-Pressure Die-Casting Process", Zhi-Peng Guo, Shou-Mei Xiong, Bai-Cheng Liu, Mei Li and John Allison, Metallurgical and Materials Transactions, Vol 39A, 2008.
  79. "The Role of Microstructure on Ductility of Die-Cast AM50 and AM60 Magnesium Alloys", Gurjeev Chadha, John E. Allison and J. Wayne Jones, Metallurgical and Materials Transactions, Vol 38A, 2007, p. 286.
  80. "A Probabilistic Model of Fatigue Strength Controlled by Porosity Population in a 319-Type Cast Aluminum Alloy: Part I. Model Development", X. Zhu, J. Z. Yi, J. W. Jones and J. E. Allison, Metallurgical and Materials Transactions, Vol 38A, 2007, pp. 1111-1122.
  81. "A Probabilistic Model of Fatigue Strength Controlled by Porosity Population in a 319-Type Cast Aluminum Alloy: Part II. Monte-Carlo Simulation"J.Z. Yi, X. Zhu, J.W. Jones, and J.E. Allison, Metallurgical and Materials Transactions, Vol 38A, 2007, p. 1123.
  82. "The Effect of Solidification Time and Solution Treatment Time on the Tensile Properties of a Cast 319-T7 Aluminum Alloy", J. M. Boileau, J. W. Zindel, L. A. Godlewski, J. E. Allison and K. A. Kofeldt, SAE Paper 2007- 01-1224 SAE Inc., Warrendale, PA, 2007.
  83. "Permanent Mold Casting and Creep Behavior of Mg-4Al-4X: (Ca, Ce, La, Sr) Alloys" Nicholas D. Saddock, Akane Suzuki, Jessica R. TerBush, J. Wayne Jones, Tresa M. Pollock, Jake Zindel and John E. Allison, SAE Paper 2007- 01-1027 SAE Inc., Warrendale, PA, 2007.
  84. "Small fatigue crack growth in metallic materials: A model and its application to engineering alloys", A. Shyam, J. E. Allison, C. J. Szczepanski, T. M. Pollock and J. W. Jones,  Acta Materialia, vol. 55, no.19, pp. 6606-6616, November 2007
  85. "Thermo-mechanical Fatigue Analysis of Cast Aluminum Cylinder Heads", C. C. Engler-Pinto Jr., X. Su, J. V. Lasecki, X. Chen and J. E. Allison, in 2007 Materials Science & Technology Proceedings, The Mineral, Metals and Materials Society, Warrendale, PA, 2007.
  86. "Statistical Approaches Applied to Very High Cycle Fatigue"  C. C. Engler-Pinto Jr., John V. Lasecki, Robert Frisch and John Allison, in Very High Cycle Fatigue (VHCF-4),  The Mineral, Metals and Materials Society, Warrendale, PA, 2007.
  87. "Effect of Frequency and Environment on Room Temperature Fatigue Performance of E319 Cast Aluminum Alloy" X. Zhu, J. Z. Yi, J. W. Jones and J. E. Allison, in Very High Cycle Fatigue (VHCF-4),  The Mineral, Metals and Materials Society, Warrendale, PA, 2007.
  88. "High Cycle Fatigue of Cast Aluminum Alloys at Ultrasonic Frequency", C. C. Engler-Pinto Jr., R. J. Frisch Sr., J. V. Lasecki, J. E. Allison, X. Zhu, J. W. Jones, SAE Paper 2006- 01, 0540 SAE Inc., Warrendale, PA, 2006.
  89. "The USAMP Magnesium Powertrain Cast Components Project" J. A. Hines, R. C. McCune, J. E. Allison, B. R. Powell, L. J. Ouimet, W. L. Miller, R. Beals, L, Kopka and P. P. Ried, SAE Paper 2006- 01, 0522, SAE Inc., Warrendale, PA, 2006.
  90. Development of Experimental Methods to Validate Residual Stress Models for Cast Aluminum Components" J. Lasecki, X. Su and J. E. Allison, SAE Paper 2006- 01, 0324, SAE Inc., Warrendale, PA, 2006.
  91. "A Test Method for Quantifying Residual Stress Due to Heat Treatment in Metals", L. A. Godlewski, X. Su, J. E. Allison, P. Gustafson and T. Pollock, SAE Paper 2006- 01, 0139, SAE Inc., Warrendale, PA, 2006.
  92. "Development and Applications of OptCast: A Thermal Boundary Condition and Cost Process Optimization Tool", M. Li, R. Vijayaraghavan and J. E. Allison, in Simulation of Aluminum Shape Casting Processing, Edited by Q. Gang, M.J.M. Krane and P.D. Lee, TMS (The Minerals, Metals & Materials Society), 2006.
  93. "The Influence of Porosity, Temperatures and Frequency on Very Long Life Fatigue of a Cast Aluminum Alloy", X. Zhu, J. Z. Yi, J. W. Jones, J. V. Lasecki and J. E. Allison, in Fatigue 2006.
  94. "On Small Fatigue Crack Growth in Structural Materials", A. Shyam, J. W. Jones and J. E. Allison, in Fatigue 2006.
  95. "Effects of Microstructure and temperature on fatigue behavior of E319-T7 cast aluminum alloy in very long life fatigue", X. Zhu, A. Shyam, J. W. Jones, H. Mayer, J. V. Lasecki and J. E. Allison, International Journal of Fatigue, 28 (2006) pp 1566-1571.
  96. "Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession", John Allison, Dan Backman and Leo Christodoulou, JOM, The Mineral, Metals and Materials Society, Warrendale, PA, November 2006, pp. 25-27.
  97. "Virtual Aluminum Castings: An Industrial Application of ICME" John Allison, Mei Li, C. Wolverton and XuMing Su, JOM, The Mineral, Metals and Materials Society, Warrendale, PA, November 2006, pp. 28-35.
  98. "Influence of Cyclic Loads Below The Endurance Limit or Threshold Stress Intensity on Fatigue Damage in Cast Aluminum Alloys 319-T7", H. Mayer, C. Ede, J. E. Allison, International Journal of Fatigue, Vol.  27, pp. 129-141, 2005.
  99. "Statistical Approaches Applied to Fatigue Test Data Analysis", C. C. Engler-Pinto Jr., J. V. Lasecki, R. J. Frisch Sr., M. A. DeJack, and J. E. Allison, SAE Transactions Journal of Materials and Manufacturing, Paper 2005-01-0802, SAE Inc., Warrendale, PA, 2005
  100. "Influence of Cyclic Loads Below Endurance Limit or Threshold Stress Intensity on Fatigue Damage in Cast Aluminum Alloy 319-T7", H. Mayer, C. Ede and J. E. Allison, International Journal of Fatigue, Vol. 27, pp 129-141, 2005.
  101. "A Small Fatigue Crack Growth Relationship and its Application to Cast Aluminum", A. Shyam, J. E. Allison and J. W. Jones, Acta Materialia,Vol. 53, no. 5, pp. 1499-1509, March 2005.
  102. "Elevated Temperature Fatigue Behavior of a Cast 319 Aluminum Alloy in the Gigacycle Regime",  X. Zhu, A. Shyam, J. W. Jones, H. Mayer, J. V. Lasecki and J. E. Allison, in proceedings of the Third International Conference on Very High Cycle Fatigue, Kusatsu, Japan, pp. 553-560, 2004.
  103.  “Modeling small fatigue crack growth in cast aluminum alloys”, A. Shyam, J.E. Allison and J.W. Jones, Proceedings of the 11th International Conference on Fracture (ICF 11), Alberto Carpinteri et al., eds., CD-ROM Edition, Turin, Italy, March 20-25, 2005.
  104. Small Fatigue Crack Propagation from Micronotches in the Cast Aluminum Alloy W319, A. Shyam, Y.N. Picard, J.W. Jones , J.E. Allison, S.M. Yalisove, Scripta Metallurgica, Vol. 50, No 8, pp. 1109-1114, 2004
  105.  
  106. Modeling the Age Hardening Behavior of Al-Si-Cu Alloys, S.C. Weakley-Bollin, W. Donlon, C. Wolverton, J.W. Jones, J.E. Allison, Metallurgical and Materials Transactions, Vol 35A, 2004, pp. 2407-2418.
  107. "A Comparative Investigation on the High Temperature Fatigue of Three Cast Aluminum Alloys", C. C. Engler-Pinto Jr,, J. V. Lasecki , J. M. Boileau and J. E. Allison, SAE Paper 2004-01-1029, SAE Inc., Warrendale, PA, 2004.
  108. "Progress Towards a Magnesium Intensive Engine: The USAMP Magnesium Powertrain Cast Components Project", R. Powell, L. Ouimet, J. E. Allison, J. Hines, R. Beals, L. Kopka, P. Reid, SAE Paper 2004-01-0654, SAE Inc., Warrendale, PA, 2004.
  109. "The Role of Microstructure and Porosity in Ductility of Die Cast AM 50 and AM60 Magnesium Alloys", G. Chadha, J. E. Allison and J. W. Jones, in Magnesium Technology 2004, A. Luo, Ed, TMS, Warrendale, PA, 2004.
  110. “The Effect of Solidification Time and Heat Treatment on the Fatigue Properties of a Cast 319 Aluminum Alloy”, J. M. Boileau and J. E. Allison, Metallurgical and Materials Transactions A, Vol 34A, 2003, pp. 1807-1820.
  111. “Potential magnesium alloys for high temperature die cast automotive applications: a review,” H. Hu, A. Yu, N. Li and J. Allilson, Materials and Manufacturing Processes, 18, (5), 2003, 687-717.
  112. "Simulation of Local Microstructures and Thermal Growth of a Cast 319 Aluminum Alloy Component", M. Li, R.Vijayaraghavan, C. Wolverton and J.E. Allison, Proceedings from 1st International Symposium on Metallurgical Modeling for Aluminum Alloys, 13-15 Oct. 2003, Pittsburgh, Pennsylvania, ASM International 2003, pp.79-86
  113. "Residual stress analysis in engine cylinder head and block", U. Weiss, X. Su, J. Lasecki and J. Allison,  Proceedings of Haus der Technik, Nov. 26-27, 2003, Essen, Germany.
  114. "Demonstration of an Endurance Limit in Cast 319 Aluminum", M. Caton, J. Jones and J. Allison,  Metallurgical and Materials Transactions, Vol 34A, 2003, pp 33-41.
  115. "Thermal and Residual Stress Analysis of an Engine Block with Cast-In Liners", X. Su, J. Jan, J. Lasecki and J. Allison, Proceedings from 1st International Symposium on Metallurgical Modeling for Aluminum Alloys, 13-15 Oct. 2003, Pittsburgh, Pennsylvania, ASM International, 2003, pp 63-68.
  116. "The Dimensional Stability of Cast 319 Aluminum", J. M. Boileau, C.A. Cloutier, L. A. Godlewski, P. A. Reeber-Symanski, C. Wolverton, and J. E. Allison, SAE Paper 2003-01-0822, SAE Inc., Warrendale, PA, 2003.
  117. "Thermomechanical Fatigue Analysis of Cast Aluminum Engine Components", X. Su, M. Zubeck, J. Lasecki, H. Sehitoglu, C. Engler-Pinto Jr. C. Tang and J. Allison, Thermomechanical Fatigue Behavior of Materials: 4th Volume, ASTM STP 1428, M. A. McGaw, S. Kalluri, J. Bressers, and S. D. Peteves, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2002.
  118. "Classical Plasticity Models for Finite Element Analysis of Cast Aluminum Powertrain Components'", M. Zubeck, X.Su and J. Allison, SAE Paper 2002-01-0392, SAE, Warrendale, PA, 2002.
  119. "Thermal Fatigue Analysis of Cast Aluminum Cylinder Head", X. Su, M. Zubeck, J. Lasecki, C. Engler-Pinto Jr. C. Tang , H. Sehitoglu, and J. Allison, SAE Paper 2002-01-0657, SAE, Warrendale, PA, 2002.
  120. "Microstructural Stability and Creep of Rare-Earth Containing Magnesium Alloys" I.P. Moreno, T.K. Nandy, J.W. Jones, J. E. Allison and T.M. Pollock, Invited Viewpoint article in Scripta Metallurgica, Vol 48, 2002, pp 1029-1039.
  121. “The Effect Of Porosity Size On The Fatigue Properties In A Cast 319 Al Alloy”, J.M. Boileau, and J. E. Allison,  SAE Paper 2001-01-0818, SAE Inc., Warrendale, PA, 2001.
  122. "Bolt Load Retention Behavior of a Die Cast Magnesium_Rare Earth Alloy", I. P. Moreno, K. Y. Sohn, J. W. Jones and J. E. Allison, SAE Paper 2001-01-0425, SAE, 2001.
  123. “The Effect Of Porosity Size On The Tensile Properties Of A Cast 319-T7 Al Alloy”, J. M. Boileau, S. H. Weber, R. H. Salzman and J. E. Allison, AFS Transactions, AFS Inc, Des Plaines, IL, 2001, pp 419-432.  
  124. "The Interactive Role of Inclusions and SiC Reinforcement on the High Cycle Fatigue Resistance of Particle Reinforced Metal Matrix Composites" N. Chawla, C. Andres, L. C. Davis, J. Jones and J. Allison Metall. and Mater. Trans., Volume 31A, pp. 951-957, 2000.
  125. "The Effect of Matrix Microstructure on the Tensile and Fatigue Behavior of SiC Particle Reinforced 2080 Aluminum Matrix Composites", N. Chawla, U. Habel, Y-L. Shen, C. Andres, J. Jones and J. Allison,  Metall. and Mater. Trans., Volume 31A, pp 531-540, 2000.
  126. "The Effect of Copper Level and Solidification Rate on the Aging Behavior of a 319-Type Cast Aluminum Alloy" C. Cloutier, J. W. Jones and J. E. Allison, SAE Paper 2000-01-0759, SAE International, Warrendale, PA, 2000.
  127. "Die Castability Assessment of Magnesium Alloys for High Temperature Applications: Part 1 of 2", J. Berkmortel, H. Hu, J. E. Kearns and J. E. Allison, SAE Paper 2000-01-1119, SAE, 2000.
  128. "Creep and Bolt Load Retention Behavior of Die Cast Magnesium Alloys for High Temperature Applications: Part 2 of 2", K. Sohn, J. W. Jones, J. Berkmortel, H. Hu and J. E. Allison, SAE Paper 2000-01-1120, SAE, 2000.
  129. "Finite Element Modeling of Bolt Load Retention of Die-Cast Magnesium", X. Su, K. Y. Sohn, D. Dewhirst and J. E. Allison, SAE Paper 2000-01-1121, SAE, 2000.
  130. "The Effect of Calcium on Creep and Bolt Load Retention Behavior of Die-Cast AM50 Alloy", K.Y. Sohn, J. W. Jones and J. E. Allison, in Magnesium 2000, TMS, Warrendale PA, 2000.
  131. "Stress-Strain Response of Aluminum 319-T6 Under Themo-Mechanical Loading" H. Sehitoglu, X. Qing, T. Smith, H. Maier, J. Allison, Metallurgical Transacations, Vol 31A, January 2000, pp. 139-151.
  132. "Elevated Temperature Tensile and Fatigue Behavior of Particle Reinforced Metal Matrix Composites," N. Chawla, J.W. Jones, and J.E. Allison, in Fatigue'99, X.R. Wu and Z.G. Wang, eds., Higher Education Press, Beijing, China, pp. 1465-1470, 1999.
  133. "Aging Response of a Cast 319 Aluminum Alloys" R. Jahn, W. Donlon and J. Allison, in Automotive Alloys III, TMS, Warrendale, PA, 1999.
  134. "A Process Model for the Age Hardening of a 319-Type Aluminum Alloy" C. Cloutier, P. Reeber-Schmansky, J. Jones and J. Allison, Automotive Alloys III, TMS, Warrendale, PA, 1999.
  135. "A Study of Small Fatigue Crack Growth in Cast Aluminum and Prediction of Fatigue Properties" M. Caton, J. Jones and J. Allison, in Small Fatigue Cracks: Mechanics, Mechanisms and Applications, K. S. Ravichandran, R. O. Ritchie and Y. Murakami, Eds,  Elsevier Science Ltd, pp. 155-166, 1999.
  136. "The Effect of Solidification Rate on the Growth of Small Fatigue Cracks in a Cast 319-Type Aluminum Alloy", M. Caton, J. Jones, J. Boileau, J. Allison, Metallurgical Transactions, Volume 30A, pp 3055-3068, 1999.
  137. "Use of a Small-Crack Fracture-Mechanics-Based Model for Predicting S-N Response of Cast Aluminum Alloys", M. Caton, J. Jones, J. Allison, Fatigue Crack Growth Thresholds, Endurance Limits and Design, ASTM STP 1372, J. C. Newman and R. S. Piascik, Eds., ASTM, West Conshohocken, PA, 2000.
  138. "Bolt-Load Retention Behavior of Die-Cast AZ91D and AE42 Magnesium Alloys", K. Y. Sohn, J. Yurko, J. W. Jones, J. Kearns and J. E. Allison, SAE Paper 980090, SAE, 1998.
  139. "Creep and Bolt-Load Retention Behavior of Die-Cast Magnesium Alloys", K. Y. Sohn, F. Chen, J. W. Jones and J. E. Allison, in Automotive Alloys II, S. Das, ed, TMS 1998.
  140. "Modeling High Temperature Stress-Strain Behavior of Cast Aluminum Alloys", T. Smith, H., J.Maier, H. Sehitoglu, E. Fleury and J. Allison, Metall. and Mater. Trans, Volume 30A, January 1999, pp. 133-146.
  141. "Characterization of Age Hardening in a 319 Al-Alloy" R. Jahn, W. Donlon, J. Allison, Microsc. Microanal. 4, Microscopy Society of America, 1998, pp. 514-515.
  142. "Effect of SiC Volume Fraction and Particle Size on the Fatigue Resistance of a 2080Al/SiC Composites" N. Chawla, C. Andres, J. Jones and J. Allison,  Metall. and Mater. Trans., Volue 29A, November 1998, pp 2843-2854.
  143. "Microstructural Influences on the Fatigue of Cast Aluminum" J. Allison, J. Jones, M. Caton, J. Boileau, Fatigue'99, X.R. Wu and Z.G. Wang, eds.,  International Conference on Fatigue, Bejing, China, Higher Education Press, Beijing, China, pp.2021-2928, 1999.
  144. "The Effect of Solidification Time and Heat Treatment on the Tensile and Fatigue Properties of a Cast 319 Aluminum Alloy" J. Boileau, P. Collins, J. Allison, Proceedings of the Fifth AFS Conference on Molten Metal Aluminum Processing, AFS Inc. Des Plaines, IL, 1998, pp. 157-172.
  145. "Cyclic Stress-Strain Behavior of Discontinuously Reinforced Metal Matrix Composites," N. Chawla, C. Andres, J.W. Jones, and J.E. Allison,  Scripta Mater., (1998) 38 1596.
  146. "Microstructure and Strengthening of Metal Matrix Composites", L. C. Davis, C. Andres and J. E. Allison, Materials Science and Engineering, 1997.
  147. "Phase-Stress Partition During Uniaxial Tensile Loading in a TiC Particulate Reinforced Al Composite", N. Shi, M. Bourke, J. Roberts and J. E. Allison, Metallurgical Transactions, 1997.
  148. The Effect of SiC Particle Reinforcement on the Creep Behavior of 2080 Aluminum", P. E. Krajewski, J. E. Allison and J. W. Jones, Metallurgical and Materials Transactions, Vol. 28A, 1997, pp. 611-620.
  149. "The Fatigue Behavior of a Cast 320 Aluminum Alloy", J. M. Boileau and J. E. Allison, in Fatigue '96, Proceedings of the Sixth International Fatigue Congress, G. Luetjering and H. Nowack, Eds., Pergamon Press, Vol. II, pp. 941-946, 1996.
  150. "Fatigue Behavior of Discontinuously Reinforced Metallic Composites", J. E. Allison and J. W. Jones, Keynote Paper in Fatigue '96, Proceedings of the Sixth International Fatigue Congress, G. Luetjering and H. Nowack, Eds., Pergamon Press, Vol. III, pp. 1439-1450. 1996.
  151. "The Effect of Casting Defects and Microstructure on the Mechanical Properties of Die Cast 356 Al and AM50 Magnesium, W. T. Donlon, C. Paige, C. Morris and J. E. Allison, in Aluminum and Magnesium for Automotive Applications, J. D. Bryant, Ed., TMS, pp. 17-27, 1996.
  152. "Advanced Materials for Automobiles", C. K. Narula, J. E. Allison, D. R. Bauer and H. S. Ghandi, in CHEMTECH, November 1996, pp. 48-60.
  153. "The Effect of Solidification Time on the Mechanical Properties in a Cast A356-T6 Aluminum Alloy", J. M. Boileau, J. W. Zindel and J. E. Allison, SAE Paper 970019, SAE, November 1996.
  154. "Bolt-Load Retention and Creep of Die-Cast Magnesium Alloys", F. C. Chen, J. W. Jones, T. McGinn, J. Kearns and J. E. Allison, SAE, November 1996. 65.         
  155. "Micromechanics Effects in Creep of Metal Matrix Composites" L. C. Davis and J. E. Allison, Metallurgical and Materials Transac­tions, A. vol. 26A, pp. 3081-3089, 1995.
  156. "The Effect of Matrix Microstruc­ture on Cyclic Response and Fatigue Behavior of Particle Reinforced 2219 Aluminum: Part I: Room Temperature Behavior", G. M. Vyletel, D. C. VanAken and John E. Allison, Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 3143-3154, 1995.
  157. "The Effect of Matrix Microstruc­ture on Cyclic Response and Fatigue Behavior of Particle Reinforced 2219 Aluminum: Part II: 150 C Behav­ior", G. M. Vyletel, D. C. VanAken and John E. Allison, Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 3155-3162, 1995.
  158. "The Effect of Particle Reinforcement on the Creep Behavior of Single Phase Aluminum", P. E. Krajewski, J. W. Jones and John E. Allison,  Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 3107-3118, 1995.
  159. "Creep Deformation in Near-Gamma TiAl, Part I: The Influence of Microstructure on Creep Deformation in Ti-49Al-1V", Brian D. Worth, J. W. Jones and John E. Allison, Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 2947-2960, 1995.
  160. "Creep Deformation in Near-Gamma TiAl, Part II: The Influence of Carbon on Creep Deformation in Ti-48Al-1V", Brian D. Worth, J. W. Jones and John E. Allison, Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 2961-2972, 1995.
  161. "Recrystallization and Grain Growth Phenomena in a Particle Reinforced Aluminum Composite", D. C. VanAken, P. E. Krajewski, G. M. Vyletel, J. E. Allison and J. W. Jones, Metallurgi­cal and Materials Transac­tions, A. vol. 26A, pp. 1395-1406, 1995.
  162. "Development of TiAl for Exhaust Valves" W. E. Dowling, W. T. Donlon and J. E. Allison, in High-Temperature Ordered Intermetallic Alloys, VI, Part 2, J. Horton, I. Baker, S. Hanada, R. Noebe and D. Schwartz, Eds., MRS, Vol 364, pp. 757-767, 1995.
  163. "Titanium Aluminide Automotive Engine Valves" Susan E. Harfield-Wunsh, A. A. Sperling, R. S. Morris, W. E. Dowling, Jr, and J. E. Allison, in Gamma Aluminides", Y-Y. Kim, R. Wagner and M. Yamaguchi, Eds., TMS, pp. 41-52, 1995.
  164. "The Influence of Microstructure on Creep Deformation in Gamma Ti-Al." B. D. Worth, J. W. Jones and J. E. Allison, in Gamma Aluminides", Y-Y. Kim, R. Wagner and M. Yamaguchi, Eds., TMS, pp. 41-52, 1995.
  165. "Metal Matrix Composites by Design" J. E. Allison, L. C. Davis and J. W. Jones, in Proceedings of the Tenth International Conference on Composite Materials, A. Poursartip and K. Street, Eds., Woodhead Publ Ltd., Vol 2, pp. II345-II352, 1995.
  166. "Fatigue Behavior of a 2080 Al/SiC Composite", U. Habel, C. Christensen, J. E. Allison and J. W. Jones, in Proceedings of the Tenth International Conference on Composite Materials, A. Poursartip and K. Street, Eds., Woodhead Publ Ltd., Vol 2, pp. II597-II604, 1995.
  167. "TiAl-based Alloys for Exhaust Valve Applications", W. E. Dowling, J. E. Allison, L. R. Swank and A. M. Sherman, SAE Paper 930620.
  168. "Measurement and Prediction of Strains in Individual Phases of a 2219Al/TiC/15p-T6 Composite During Loading", M. A. M. Bourke, J. A. Goldstone, N. Shi, J. E. Allison, M. G. Stout and A. C. Lawson, Scripta Met. et Material, Vol 29, pp771-776, 1993.
  169. "Residual Stresses and Their Effect on Deformation in Particle-Reinforced Metal-Matrix Composites", L. C. Davis and J. E. Allison, Metall Trans A, Vol 24A, pp. 2487-2496, 1993.
  170. "The Influence of Matrix Microstructure and TiC Reinforcement on the Cyclic Response and Fatigue Behavior of 2219 Al", G. M. Vyletel, J. E. Allison and D. C. Van Aken, Metall Trans A, Vol 24A, pp. 2545-2557, 1993.
  171. "The Effect of Spherical TiC Reinforcement on the Creep Behavior of Aluminum Alloys", P. E. Krajewski, J. E. Allison and J. W. Jones, in Proceedings of ASMI Conference on Processing, Fabrication and Application of Advanced Composites, pp. 151-158, ASM International, Metals Park, OH, 1993.
  172. "Strain Measurement in Individual Phases of an Al/TiC Composite During Mechanical Loading", M. A. M. Bourke, J. A. Goldstone, M. G. Stout, A. C. Lawson and J. E. Allison, in Residual Stresses in Composites, E. V. Barrera and I. Dutta, eds., pp. 67-77, TMS, Warrendale, PA, 1993.
  173. "The Influence of Matrix Microstructure and Particle Reinforcement on the Creep Behavior of 2219 Aluminum", P. E. Krajewski, J. E. Allison and J. W. Jones, Metall Trans A, Vol 24A, pp. 2731-2741, 1993.
  174. "MMCs in the Automotive Industry: Opportunities and Challenges" , J. Allison and G. Cole, JOM, 1993 (45) pp. 19-24.
  175. "The Effect of Matrix Microstructure and Particle Reinforcement on the Fatigue Behavior of 2219 Al" G. M. Vyletel, J. E. Allison and D. C. Van Aken, Fatigue '93, J. P. Bailon and J. I. Dickson, eds. Vol II, pp.1161-1166.
  176. "Shape Optimization of Connecting Rod Pin End Using a Generic Model" R. J. Yang, D. L. Dewhirst, J. E. Allison and A. Lee, Finite Element in Analysis and Design, 1992 (11), pp. 257-264.
  177. "Effect of Cold Work on the Recrystallized Grain Size in a Particle-Reinforced Aluminum Alloy", G. M. Vyletel, P. E. Krajewski, D. C. Van Aken, J. W. Jones and J. E. Allison, Scripta Metall. Material., 1992 (27), pp. 549-554.
  178. "The Development of Gamma Titanium Aluminides for Exhaust Valves" W. E. Dowling, J. E. Allison and A. M. Sherman, in Titanium '92, Science and Technology, F. H. Froes and I. L. Caplan, eds., pp. 2681-2688, TMS, Warrendale, PA., 1992.
  179. "The Influence of Thermal Exposure on Properties and Microstructure of Elevated Temperature Titanium Alloys", W. T. Donlon, J. E. Allison and J. V. Lasecki, in Titanium '92, Science and Technology, F. H. Froes and I. L. Caplan, eds., pp. 295-302, TMS, Warrendale, PA., 1992.
  180. "The Influence of Microstructure on the Creep Behavior of the Near-Gamma Alloy Ti-48Al-1V-0.2C" B. D. Worth, J. W. Jones, J. E. Allison and W. E. Dowling, in Titanium '92, Science and Technology, F. H. Froes and I. L. Caplan, eds., pp. 391-398, TMS, Warrendale, PA., 1992.
  181. The Influence of Microstructure and Carbon on the Tensile Behavior of the Near-Gamma Alloy Ti-48Al-1V-0.2C" W. E. Dowling, B. D. Worth, W. T. Donlon and J. E. Allison, in Titanium '92, Science and Technology, F. H. Froes and I. L. Caplan, eds., pp. 423-430, TMS, Warrendale, PA., 1992.
  182. "Fatigue Behavior of a 2xxx-series Aluminum Alloy Rein­forced with 15v/o SiCp", J. J. Bonnen, J. E. Allison and J. W. Jones, Metall. Trans A. May 1991, pp. 1007-1019.
  183. "The Influence of Microstructure on the Mechanical Behavior of Gamma Titanium Aluminides" W. E Dowling, Jr, B. D. Worth, J. E. Allison and J. W. Jones, in Microstructure/Property Relationships in Titanium Aluminides and Alloys,  Kim, Y-W. and Boyer, R. R., eds., TMS, 1991, pp. 123-133.
  184. "Dislocation Structures in Deformed Gamma Titanium Aluminides", W. T. Donlon, W. E. Dowling, Jr and J. E. Allison, in Microstructure/Property Relationships in Titanium Aluminides and Alloys,  Kim, Y-W. and Boyer, R. R., eds., TMS, 1991, pp. 75-88.
  185. "The Influence of Strain Rate on Dislocation Structures in Gamma Titanium-Aluminides Deformed at 815C", W. T. Donlon, W. E. Dowling, Jr, and J. E. Allison, in Mat. Res. Soc. Symp. Proc., MRS, 1991, pp. 297-304.
  186. "The Fatigue Behavior of Gamma Titanium-Aluminides", W. E. Dowling, W. T. Donlon and J. E. Allison, in Mat. Res. Soc. Symp. Proc., MRS, 1991, pp. 561-567.
  187. "Effect of Microstruc­ture on the Cyclic Response and Fatigue Behavior of an XD Aluminum Metal Matrix Composite", G. M. Vyletel, D. C. Van Aken and J. E. Allison, Scripta Metall. Material., 1991, pp. 2405-2410.
  188. "Trends in the use of Lightweight Metallic Materials for Automotive Engine Components", J. E. Allison, in Automotive Technology for Environment and Safety, 4th Kia Inter­national Academic Seminar, Kia Motor Co., Seoul, Korea, November 1991.
  189. "The Influence of Microstructure and Temperature on the Fatigue Behavior of Gamma/Alpha-2 Titanium Aluminides", W. E. Dowling, W. T. Donlon and J.E.Allison, in Fatigue '90, Proceedings of Fourth Interna­tional Conference on Fatigue, Vol. III, H. Kitagawa and T. Tanaka, eds., MCEP Publications, 1990, pp.1923-1928.
  190. "Fatigue Behavior of Discontinuously Reinforced Aluminum Matrix Composites", J. J. Bonnen, C. P. You, J. E. Allison and J. W. Jones, in Fatigue '90, Proceedings of Fourth International Conference on Fatigue, Vol. II, H. Kitagawa and T. Tanaka, eds., MCEP Publications, 1990, pp.887-892.
  191. "Problems Associated with Quantification of Fatigue Crack Closure", J.E.Allison and C. P. You, in Fatigue '90, Proceedings of Fourth International Conference on Fa­tigue, Vol. II, H. Kitagawa and T. Tanaka, eds., MCEP Publications, 1990, pp.1249-1254.
  192. "Dislocation Structures in Titanium Aluminides Deformed at 815 C" in Proceedings of XIIth International Congress for Electron Microscopy, San Francisco Press, Inc., 1990, pp. 984-985.
  193. "A Fractographic Study of Creep Crack Growth in Rapidly Solidified Al‑Fe‑X Alloys", S. F. Claeys, J. W. Jones and J. E. Allison, in Dispersion Strengthened Aluminum Al­loys, Y. W. Kim and W. M. Griffith, eds., TMS‑AIME, Warrendale, PA, 1988
  194. "The Influence of Elevated Temperature on the Mechanical Behavior of a/ß Titanium Alloys", J. E. Allison, W. Cho, J. W. Jones, W. T. Donlon and J. V. Lasecki, in Titanium '88, proceedings of Sixth World Con­gress on Titanium, Cannes, France, June 1988, pp. 293-298.
  195. "Creep Behavior of Ti‑6242: The Effect of Microstructure and Silicon Content", W. Cho, J. W. Jones, J. E. Allison and W. T. Donlon, in Titanium '88, proceedings of Sixth World Congress on Titanium, Cannes, France, June 1988, pp. 187-192.
  196. "Fatigue Crack Growth and Closure in a SiC-Reinforced Aluminum Compos­ite" C. P. You and J. E. Allison, in Advances in Fracture Research, ICF7, K. Salama, K. Ravi-Chandar, D. Taplin, P. Rao, eds., Pergamon Press, 1989 pp. 3005-3012.
  197. "A Comparison of Measurement Methods and Numerical Crite­ria for the Experimental Determination of Fatigue Crack Closure", J.E. Allison, R.C. Ku and M.L. Pompetzki, Mechanics of Fatigue Crack Closure, ASTM STP 982, J. C. Newman and W. Elber, eds.,ASTM, Philadelphia, PA, 1988, pp. 171-185.
  198. "Characterization of Rapidly Solidified Al-8Fe-2Mo and Al‑8Fe‑1.5V‑1.5Si", W. T. Donlon, H. K. Plummer and J. E. Allison, in Proceedings of the Microbeam Society, 1987.
  199. "The Use of Titanium in Engine Valve Trains", J.E. Allison, A.M. Sherman and M. R. Bapna, Journal of Metals, Vol. 39 (2), 1987, pp. 14­‑17.
  200. "Effect of Cold Work on the Corrosion Fatigue and Stress Corrosion Cracking Properties of Duplex Stainless Steel A905" M.P. Mueller, A. Atrens and J. E. Allison, Material und Technik, Vol. 87/1, 1987, pp. 3‑8.
  201. "On the Measurement of Crack Closure During Fatigue Crack Growth", J.E. Allison, Fracture Mechanics, ASTM STP 945, D. T. Read and R. P. Reed, eds, ASTM, Philadelphia, PA, 1987, pp. 913-933.
  202. "Potential for Automotive Applications of Titanium Al­loys", A.M. Sher­man and J.E. Allison, SAE Paper 860608, 1986.
  203. "Microstructure of an Extruded Rapidly Solidified Al‑8Fe‑2Mo Alloy", W.T. Donlon, J.E. Allison and S. Shinozaki, EMSA '86, G. W. Bailey, ed., San Francisco Press, 1986, pp. 548-549.
  204. "Characterization of Rapidly Solidified Al‑8Fe‑2Mo", H.K. Plummer, W.T. Donlon, J.E. Allison and S. Shinozaki, EMSA '86, G. W. Bailey, ed., San Francisco Press, 1986, pp. 546-547.
  205. "Advanced Materials in Automotive Engines: Conference Review", A.M. Sherman and J.E. Allison, Journal of Met­als, Vol. 30 (12), 1986, pp. 18‑19.
  206. "The Role of Crack Closure in Rationalizing the Varia­tions in Fatigue Crack Growth Behavior of Titanium Al­loys", J.E. Allison and J.C.Williams, in Titanium, Sci­ence and Technology (5th International Conference),  G. Luetjering, U. Zwicker and W. Bunk, Eds., DGM Publ., 1985, pp. 2243‑2251.
  207. "The Effect of Microstructure on the Ultrasonic Attenua­tion Character­istics of Ti‑6Al‑4V", J.E. Allison, P.A. R­usso, S.R. Seagle and J.C. Williams, in Titanium, Science and Technology (5th International Conference), G. Luetjering, U. Zwicker and W. Bunk, Eds., DGM Publ., 1985, pp. 909‑917.
  208. "The Effect of Silicon on the Microstructure of High Temperature Titanium Alloys", D. Banerjee, J.E. Allison, F.H. Froes and J.C.Williams, in Titanium, Science and Technology (5th International Conference), G. Luetjering, U. Zwicker and W. Bunk, Eds., DGM Publ., 1985, pp. 1519‑1527.
  209. "Microstructural Influences on Fatigue Crack Propagation in Ti‑10V‑2Fe‑3Al" T.W. Duerig, J.E. Allison and J.C. Williams, Metallurgical Transactions,A, Vol. 16A (5), 1985, pp. 739‑751.
  210. "Near‑threshold Fatigue Crack Growth Phenomena at Ele­vated Temperature in Titanium Alloys", J.E. Allison and J.C.Williams, Scripta Metal­lurgica, Vol. 19 (5), 1985, pp. 773‑778.
  211. "Subsurface Crack Initiation in High Cycle Fatigue in Ti‑6Al‑4V and in a Typical Martensitic Stainless Steel", A. Atrens, W. Hoffelner, T.W.  Duerig and J.E. Allison, Scripta Metallurgica, Vol.17, 1983, pp. 601‑­606.
  212. "The Role of Deformation Character on Fatigue Crack Growth in Titanium Alloys" J.E. Allison and J.C. William­s, in Strength of Metals and Alloys, (ICSMA 6), R.C. Gif­kins, Ed., Pergamon Press, 1983, pp. 1219‑1224.
  213. "Influence of Slip Character and Microstructure on Fa­tigue Crack Growth in Alpha and Alpha/Beta Titanium Alloys", J.E. Allison, Ph.D. disser­tation, Carnegie‑­Mellon University, Pittsburgh, Pennsylvania, 1982.
  214. "Effect of Quenching and Aging on Fatigue Crack Propaga­tion Rate of Ti‑Al Alloys," A. Gysler, J.E. Allison, J.C. Williams, G. Luetjering, in Fatigue Thresholds, J.Backlund, A.Brom, C.J.Beevers, Eds., EMAS Publ.  Ltd., l98l.
  215. "Evaluation of Processing‑Microstructure‑Property Rela­tionships for Ti‑6242S," J.E. Allison, J.C. Williams, S.L. Semiatin, in Research to Develop Process Models for Producing a Dual Property Titanium Alloy Compres­sor Disk, AFWAL‑TR‑8l‑4130, Materials Laboratory, AFWAL, WPAFB, OH 45433, September l98l.
  216. "Effect of Biaxial Stresses on Crack Growth," A.F. Liu, J.E. Allison, D.F. Dittmer, J.R. Yamane, in Fracture Mechanics, ASTM STP 677), C.W.Smith, Ed., American Society for Testing and Materials, l979, pp. 5‑22.
  217. "Measurement of Crack‑Tip Stress Distributions by X‑ray Diffraction," J.E. Allison, in Fracture Mechanics, ASTM STP 677, C.W.Smith, Ed., American Society for Testing and Materials, l979, pp. 550‑562.
  218. "The Development of Quantitative NDI for Retirement‑for‑­Cause," J.E. Alli­son, J.M. Hyzak, W.H. Reimann in Pre­vention of Structural Failures, American Society for Metals, l978 and AFML‑TR‑78‑198, Air Force Materials Laboratory, WPAFB, February l979.
  219. "Measurement of Crack Tip Stresses by X‑ray Diffraction," J.E. Allison, AFFDL‑TR‑78‑24, WPAFB, OH, March l978.
  220. "A Computer Automated Inspection System for Aircraft Forgings," B.G.W. Yee, J.E. Allison, in Proceedings of 23rd Defense Conference on Non‑destr­uctive Testing, September l974, and in Proceedings of IITRI Confer­ence on Automated Inspection and Product Control, October l974.
  221. INVITED PRESENTATIONS
  222. Underline denotes speaker, if other than JEA
  223. T. Berman, M. Yaghoobi, M. Pilipchuck, S. Lee, D. Montiel, K. Thornton, V. Sundararaghavan, A. Bucsek and J. Allison, "Using the PRISMS Center Framework to Accelerate the Design of Alloys and Process for Formable Mg Sheet", Keynote Talk for LMD Symposium on An Atoms to Autos Approach for Materials Innovations for Lightweighting at TMS Annual Meeting, San Diego, CA, March 2024.
  224. J. Allison, "An Integrated Simulation and Experimental Framework for Characterizing Deformation Mechanism in Alloys", Invited Talk in Symposium on Advanced Characterization Techniques for Quantifying and Modeling Deformation at TMS Annual Meeting, San Diego, CA, March 2024.
  225. J. Allison, "An Integrated Simulation and Experimental Framework for Characterizing Deformation Mechanisms in Alloys"; Advanced Characterization Methods Symposium, Invited Talk, TMS Annual Meeting, Orlando, FL, March 2023.
  226. J. Allison, T. Berman, M. Yaghoobi, M. Philipchuck, S. Lee, D. Montiel, K. Thornton, V. Sundararaghavan, A. Bucsek, "Using the PRISMS Center Framework to Accelerate the Design of Alloys and Processes for Formable Mg Sheet"; Keynote Lecture, Mg Technologies Symposium, TMS Annual Meeting, Orlando, FL, March 2023.
  227. J. Allison, "The PRISMS Framework: An Integrated Open-Source Multi-scale Capability for Accelerated Predictive Materials Science", Keynote Lecture, International Conference on Multiscale Materials Modeling, Baltimore, MD, September 2022.
  228. J. Allison, "Accelerating the insertion of science into engineering of manufactured products" Plenary Lecture, Materials Genome Initiative Summit, Washington DC, June 2022.
  229. J. Allison, "Integrated Computational Materials Engineering", Invited Seminar for Apple Materials Engineering, April 2022.
  230. J. Allison, “Integrating Theory, Simulation and Experiment to Accelerate Predictive Materials Science,” invited talk in TMS Hume-Rothery Symposium, TMS Annual Meeting, March 2022.
  231. J. Allison, “Accelerating Understanding of Fatigue of Metals,” keynote for TMS Honorary Symposium for J. Wayne Jones, TMS Annual Meeting, March 2022.
  232. J. Allison, “Integrating Theory, Simulation and Experiment to Accelerate Predictive Materials Science,” Seminar, Worchester Polytechnic Institute, November 2021.
  233. J. Allison, “Accelerating Predictive Understanding of Microstructural Evolution and Mechanical Behavior of Magnesium Alloys”, Invited Plenary Talk at International Conference on Magnesium Alloys, Virtual, 2021.
  234. J. Allison, “Integrated Predictive Materials Science: Filling the ICME Pipeline” invited talk in TMS Hume-Rothery Symposium, TMS Annual Meeting, Virtual April 2020.
  235. J. Allison, “ICME”, Plenary Address at AIAA- SciTech Conference, Orlando, FL, January 2020.
  236. J. Allison, A. Murphy, D. Greeley, D. Pagan, M. Yaghoobi, M. Miller, V. Sundararaghavan, “Measuring, Modelling and Publishing 3D and 4D Information to Accelerate Our Understanding of Cyclic Deformation in Metals” invited talk at Metal Microstructures in 2D, 3D and 4D, Riso International Symposium on Materials Science, Riso Denmark, September 2019.
  237. J. Allison and C. Park, “LIFT ICME: A Strategic Initiative for Accelerating Manufacturing Innovation of Metallic Materials”, Keynote address at TMS 5th World Congress on ICME, Indianapolis, IN, July 2019.
  238. J. Allison, “PRISMS Center: Integrated Software Tools and a Framework for Next Generation ICME”, Invited talk at TMS 5th World Congress on ICME, Indianapolis, IN, July 2019.
  239. J. Allison, T. Berman, Z. Yao, M. Lei, “Predicting Microsegregation and Microstructural Evolution in HPDC Mg Alloys”, invited talk at David St John Symposia, TMS Annual Meeting, San Antonio, Texas, March 2019.
  240. "The PRISMS Framework: An Integrated, Predictive Multi-Scale Capability for Next Generation ICME", Invited Talk, TMS Annual Meeting, March 2018.
  241. “PRISMS: Integrated Software Tools and a Framework for Next Generation ICME/Materials Genome Engineering” University of Science and Technology Beijing, Beijing, China, July 2018.
  242. “Incorporating ICME into Engineering Curricula” North America Materials Education Symposia” Granta, Ann Arbor, MI, August 2018
  243. J. Allison, J. Adams, A. Murphy, S. Panwar, M. Yaghoobi, J. W. Jones, V. Sundararaghavan, “Predicting Fatigue Behavior in Metals and Alloys: The PRISMS Center Fatigue Use Case” Invited talk in Hael Mughrabi Symposia, International Conference on Strength of Metals and Alloys, Columbus, Oh, July 2018.
  244. "The Center for PRedictive Integrated Structural Materials Science (PRISMS)," IMDEA Advanced Materials Institute, Madrid, Spain, December 2017.
  245. "ICME: The Next Big Thing in Structural Materials," University of Science and Technology Beijing, Beijing, China, May 2017.
  246. "Very High Cycle Fatigue, ICME and Big Data," International Conference on Very High Cycle Fatigue (VHCF-7), Dresden, Germany, July 2017.
  247. "The PRISMS Framework: An Integrated Predictive Multi-Scale ICME Capability for the Global Materials Community", ICME World Congress, TMS, Ypsilanti, MI, May 2017
  248.  “PRISMS Center: A Software Innovation Center for the Structural Metals Community” TMS Annual Meeting, Nashville, TN, March 2016
  249.  “PRISMS Center: Integrated Software Tools and A Framework for the Global Structural Metals Community”, ICME Integration Workshop, ICMEg, Barcelona, Spain, April 2016.
  250. S. DeWitt*, S. Rudraraju, K. Thornton, and J. Allison, "PRISMS-PF: An Open Source Finite Element Phase Field Code", Center for Hierarchical Materials Design Phase Field Methods Workshop III, Evanston, IL, May 4, 2016.
  251. B. Puchala, G. Tarcea, S. Tamma, M. Hedstrom, H. V. Jagadish, E. A. Marquis, J. Allison, "The Materials Commons: A Novel Information Repository and Collaboration Platform for the Materials Community", CHiMaD Buiding an Interoperable Materials Data Infrastructure Workshop, Evanston, IL, May, 2, 2016.
  252. "PRISMS Integrated Software Tools and a Framework for the Structural Metals Community", invited keynote talk, 9th Pacific Rim Conference on Advanced Materials and Processes, Kyoto, Japan, July 2016.
  253. "The PRISMS Center Framework: An Integrated Predictive Multi-Scale Capability for the Global Materials Community", MRS, December 2016.
  254. “ICME: Past, Present and Future” Invited Plenary, ICME World Congress, TMS, Colorado Springs, CO, June 2015.
  255. “PRISMS, A Software Innovation Center for the Structural Metals Community”, Invited Keynote, ICME World Congress, TMS, Colorado Springs, CO, June 2015.
  256. “Integrated Computational Engineering for Titanium Products”, Invited Keynote, International Titanium Congress, San Diego, CA, August 2015.
  257. “ICME: A New Approach for Accelerating Manufacturing Innovation” Invited Talk “TMS Manufacturing Summit, Pittsburgh, PA, November 2015.
  258. “PRISMS Center: A Software Innovation Center for the Structural Metals Community” Invited Talk, TMS Annual Meeting, Nashville, TN, March 2016
  259. “PRISMS Center: Integrated Software Tools and A Framework for the Global Structural Metals Community”, Invited Talk, ICME Integration Workshop, ICMEg, Barcelona, Spain, April 2016.
  260. "Integrated Computational Materials Engineering (ICME): The Next Big Thing in Structural Materials", Distinguished Speaker Series, Department of Aerospace Engineering, University of Kansas, Lawrence Kansas, April 2015.
  261. "Integrated Computational Materials Engineering (ICME): The Next Big Thing in Structural Materials" Department of Metallurgical Engineering, University of Utah, Salt Lake City, Utah, February 2015.
  262. "PRedictive Integrated Structural Materials Science: An Innovation Center for the Materials Profession", Plenary for NSF / DOE-BES MGI Principal Investigator Summit, Bethesda, MD, January 2015.
  263. "The Materials Commons An Evolving Information Repository and Collaboration Platform for the Materials Community" MGI-Townhall Meeting on Data Infrastructure, MS&T, Pittsburgh, PA, October 2014.
  264. "ICME and MGI: Here to Stay or Just The Next Big Thing", TMS-MDMD Division Luncheon, San Diego, CA, March 2014.
  265. "Integrated Computational Materials Engineering (ICME): An Essential Ingredient of the Materials Genome Initiative" Invited Plenary talk for MGI Anniversary Summit, DOE/NIST, Gaithersburg, Md, June 2013.
  266. "Integrated Computational Materials Engineering: The Next Big Thing in Structural Metals" NSF Materials Genome Initiative Workshop, Washington, DC, December 2012.
  267. "A Microstructural Evolution Model for Mg17Al12 Precipitates in AZ91", International Conference on Magnesium, Vancouver, BC, Canada, July 2012.
  268. "Integrated Computational Materials Engineering: Current State and Path Forward", International Conference on Aluminum Alloys, Pittsburgh, PA, June 2012.
  269.  “Integrated Computational Materials Engineering: The Next Big Thing in Materials”, Distinguished Speaker, Materials Day, Pennsylvania State University, Materials Institute, April 2012.
  270. “Integrated Computational Materials Engineering: The Next Big Thing in Materials”, Carnegie-Mellon University, Jan 2012
  271. “Integrated Computational Materials Engineering: The Next Big Thing in Materials”, TMS & MRS Materials Information Luncheon, Washington DC, August 2011.
  272. “Integrated Computational Materials Engineering: The Next Big Thing in Materials”, Distinguished Materials Forum, University of Science and Technology Beijing, June 2011.
  273. “Integrated Computational Materials Engineering: The Next Big Thing in Materials”, Distinguished Materials Forum, University of Science and Technology Beijing, June 2011.
  274. “Integrated Computational Materials Engineering: Current Status and Future Steps” Invited Plenary for TMS Global Innovations Symposia, TMS Annual Meeting, San Diego, CA, February, 2011.
  275. “Integrated Computational Materials Engineering” AICHE Symposia on Simulation-Based Engineering and Science, Salt Lake City, NV, November 2010.
  276. “Integrated Computational Materials Engineering: Integrating Computational Materials Science and Engineering”, US Department of Energy, Office of Basic Energy Science Workshop on Computational Materials Science and Chemistry for Innovation, Bethesda, MD, July 2010.
  277. “Integrated Computational Materials Engineering: The Next Big Thing in Structural Materials”, 47th Sagamore Army Materials Research Conference on Advanced Lightweight Metals Technology, St. Michaels, MD, June 2010.
  278. “Integrated Computational Materials Engineering: An Industrial Perspective”, University Materials Council Workshop on Computational Materials Science and Engineering, Northwestern University, June 2010.
  279. "Materials Challenges Along the Road to Sustainability in the Automotive Industry" TMS Symposia on Sustainability, Seattle, WA, February 2010. 
  280. "Integrated Computational Materials Engineering: The Next Big Thing in Structural Materials" Case Western Reserve University, Cleveland OH, March 2010.
  281. "Integrated Computational Materials Engineering: A Transformational Discipline for the Global Materials Profession", Plenary for International Symposia on Emerging Challenges for Metals and Materials: Engineering & Technology, Indian Institute of Metals, Kolkatta, India, November 2009.
  282. "Integrated Computational Materials Engineering: A New and Essential Capability for Surviving Extreme Environments in the Automotive Industry." Workshop on Structural Materials Under Extreme Conditions, Los Alamos National Laboratory, July 2009.
  283. "Integrated Computational Material Engineering: A Transformational Discipline for Improved Competitiveness and National Security" NSF Workshop on Simulation Based Engineering and Science, April 2009.
  284. "Integrated Computational Materials Engineering (ICME): Opportunities and Needs for Educating Future Materials Engineers and Scientists" TMS Annual Meeting, March 2009.
  285. "The Importance of Experiments in Integrated Computational Materials Engineering (ICME)" TMS Annual Meeting, March 2009.
  286. "Integrated Computational Materials Engineering" The University of Michigan, Ann Arbor, MI, January 2008.
  287. "Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession" Shanghai Jiao Tong University, Shanghai, China, April 2008
  288. "Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession" Nanjing University of Aeronautics and Astronautics, Nanjing, China, April 2008.
  289. "Integrated Computational Materials Engineering" DOD Reliance 21 Annual Materials and Processing Workshop, Annapolis, MD, May 2008.
  290. "Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession", The Mineral Metals and Materials Society, Orlando, FL, February 2007.
  291. "Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession", ExxonMobil Materials Network Conference, Atlanta, GA, May 2007.
  292. "Virtual Aluminum Castings: ICME in the Automotive Industry", TMS/ASM 2007 Materials Science and Technology Conference, Detroit, MI, September 2007.
  293. "Virtual Aluminum Castings: The Ford Experiment in Integrated Computational Materials Engineering", Johns Hopkins University, Baltimore, MD, October 2007.
  294. "Integrated Computational Materials Engineering" National Academy of Engineering Regional Meeting on Materials Innovations, University of Virginia, May 2006.
  295. "Integrated Computational Materials Engineering" Plenary for Chinese MRS International Symposia on Magnesium, Beijing, China, June 2006.
  296. "Integrating Manufacturing, Materials and Design – The Virtual Way" ASM Detroit Chapter Woodside Lecture, September 2006.
  297. "Virtual Aluminum Castings: The Ford Experiment in Integrated Computational Materials Engineering" TMS Annual Meeting 2005
  298. "Virtual Aluminum Castings: The Ford Experiment in Integrated Computational Materials Engineering" Seminar at Michigan State University, April 2005.
  299. "Modeling Aluminum Castings" TMS/SAE Webcast on Integrating Design, Manufacturing and Materials Models, June 2005.
  300. "Virtual Aluminum Castings", National Materials Advisory Board panel on Virtual Manufacturing, 2004.
  301. "Integrated Computational Materials: The Next Materials Age?", Plenary for Numiform 2004, Columbus, Ohio, June 2004.
  302. "Virtual Aluminum Castings" Invited Talk at TMS/ASM/AIST Materials Science and Technology Conference, Pittsburgh, PA  2003.
  303. "Metallurgical Effects on Fatigue in Cast Aluminum Alloys", J. Allison and A. Campbell, Invited Talk at 2001 Annual TMS Meeting.
  304. "Virtual Aluminum Castings" Monash University, Melbourne, Australia, September 2001.
  305. "Virtual Aluminum Castings – Bridging The Gap Between Atoms and Global Competitiveness and Sustainability", Gordon Conference on Physical Metallurgy, Holderness, NH, July 2000.
  306. "Microstructural Influences on the Fatigue of Cast Aluminum" Keynote Lecture for Fatigue'99, Seventh International Conference on Fatigue, Beijing, China, June, 1999.
  307. "Virtual Aluminum Castings" Department of Mechanical Engineering, Tsinghua University, Beijing, China, June 1999.
  308. "Processing-Structure-Property Relationships in Cast Aluminum for Automotive Components" Department of Materials Science and Engineering, The University of Michigan, 1998.
  309. "Light Weight Connecting Rod: Alternate Material Case Study", J. E. Allison, NMAB Workshop on Advanced Materials, Washington, DC, March 1998.
  310. "Influence of Processing On Fatigue of Cast Aluminum" Workshop on Fatigue of Industrial Materials, ASM-Milwaukee Section, Milwaukee, WI, April 1998.
  311. "Elevated Temperature Fatigue Behavior of Particle Reinforced Metal Matrix Composites," N. Chawla, J.W. Jones, and J.E. Allison,  ASM/TMS Symposia on Fracture Mechanisms in Composite Materials,  Rosemont, IL, October, 1998.
  312. "Small Crack Effects in Cast Aluminum". M. Caton, J. W. Jones and J. E. Allison, Engineering Foundation Conference on Small Fatigue Cracks: Mechanics and Mechanisms, Oahu, Hawaii, December, 1998.
  313. "High Cycle Fatigue Behavior of Particle Reinforced Aluminum Composites", J. E. Allison and J. W. Jones, Invited talk at TMS/ASM  Symposia on High Cycle Fatigue of Advanced Materials, Indianapolis, IN, September 1997.
  314. "The Influence of Volume Fraction and Particle Size on Fatigue of Aluminum Composites", C. Andres, J. W. Jones and J. E. Allison, Invited talk at ASM/TMS Symposia on Fracture Mechanisms of Metal Matrix Composites, Indianapolis, IN, September 1997.
  315. "The Influence of Solidification Rate on Fatigue Crack Growth of Small Cracks in Cast 319 Al", M. Caton, J. W. Jones and J. E. Allison, Invited talk at Symposia on High Cycle Fatigue of Advanced Materials, Indianapolis, IN, September 1997.
  316. "Low Cost, Durable Cast Aluminum for Automotive Powertrains", J. E. Allison, Wayne State University, October 1997.
  317. "Mechanical Behavior of Aluminum Composites" N. Chawla, J. W. Jones and J. E. Allison, Workshop on Mechanics of Composite Materials, Santa Fe, New Mexico, October, 1997.
  318. "Fatigue Behavior of Discontinuously Reinforced Metallic Composites", with J. W. Jones, Keynote for Fatigue '96, Sixth International Fatigue Congress, Berlin, Germany, May 1996.
  319. "Material Modeling in the Automotive Industry" NSF-Center Select Workshop on Materials Modeling, University of California, Santa Barbara, January 1996.
  320. "Processing-Structure-Property Relationships in Cast Aluminum Alloys" Technical University of Hamburg-Harburg, Hamburg, Germany, May 1996.
  321. "Fatigue Behavior of Discontinuously Reinforced Metallic Composites", Keynote Talk for Fatigue '96, Sixth International Fatigue Congress, Berlin, Germany, May 1996.
  322. "Titanium Aluminide Automotive Engine Valves" Susan E. Harfield-Wunsch, W. E. Dowling, Jr, and J. E. Allison, invited paper presented at TMS International Symposium on Titanium Aluminides, TMS Annual Meeting, Las Vegas, NV, February, 1995.
  323. "Advanced Materials in the Automotive Industry", plenary talk at 4th International MPIF Conference on Powder Metallurgy in Aerospace, Defense and Demanding Applications, Anaheim, CA, May 1995.
  324. "Metal Matrix Composites in the Automotive Industry: Opportunities and Challenges" SME Workshop on Composites in the Automotive Industry, SME, Troy, MI, June 1995.
  325. "Composites by Design: Metallurgy and Micromechanics­ of Particle Reinforced Metals", University of British Columbia, August 1995.
  326. "Composites by Design: Metallurgy and Micromechanics of Particle Reinforced Metals" University of Michigan, September 1995.
  327. "Cost is a Technical Problem", ARPA/ONR Select Workshop on Process Modeling, MIT, Boston, Mass, January, 1994.
  328. "Composites by Design: Metallurgy and Micromechanics of Particle Reinforced Metals" Cincinnati ASM Meeting, September 1994.
  329. "Composites by Design: Metallurgy and Micromechanics of Particle Reinforced Metals", with L. C. Davis, ASM/ESD Annual Composites Conference, November, 1994.
  330. "Composites by Design: Metallurgy and Micromechanics of Particle Reinforced Metals", Technical University Hamburg-Harburg, August, 1994.
  331. "Behavior of Titanium Alloys at Very High Temperatures" Technical University Hamburg-Harburg, August, 1994.
  332. "Development of TiAl for Exhaust Valves" W. E. Dowling, W. T. Donlon and J. E. Allison, invited review presented at MRS, Boston, November 1994.
  333. "Micromechanics of Particle Reinforced Metals" with L. C. Davis, presented at SME Annual Meeting, Detroit, MI, June 1993.
  334. "Mechanical Behavior of Discontinuously Reinforced Composites: From Applica­tions to Fundamentals",  Cambridge University, August 1993.
  335. "Mechanical Behavior of Discontinuously Reinforced Composites: From Applica­tions to Fundamentals", Oxford University, August 1993.
  336. "Metal Matrix Composites in the Automotive Industry: Opportunities and Challenges" with G. Cole, presented at ASM-ESD Composites Conference, Detroit, MI, November 1993.
  337. "Mechanical Behavior of Particle-Reinforced Aluminum Alloys" University of New South Wales, Sydney, Australia, February, 1992.
  338. "MMCs in the Automotive Industry: From Applications to Fundamentals", DOE Workshop on Modeling of MMCs and Multi-Phase Materials, Los Alamos National Laboratory, NM, October 1992.
  339. "Microstructure-Property Relationships in Elevated Temperature Titanium Alloys" Rockwell International Science Center, Thousand Oaks, CA, January 1991.
  340. "Fatigue of Discontinuously Reinforced Metal Matrix Composites" Aerospace Research Laboratory, Melbourne, Vic., Australia, May 1991.
  341. "Fatigue of Discontinuously Reinforced Metal Matrix Composites" Department of Materials Engineering, Monash University, Melbourne, Australia, June 1991.
  342. "Mechanical Behavior of Discontinuously Reinforced Metal Matrix Composites" Department of Materials Science, University of Queensland, Brisbane, QLD, Australia, October 1991.
  343. "Trends in use of Lightweight Metallic Materials for Automotive Engine Components", Plenary talk at 4th Kia International Academic Seminar, Seoul, Korea, November 1991.
  344. "Recent Developments in Metal Matrix Composites for the Automotive Industry", 4th Kia International Academic Seminar, Seoul, Korea, November 1991.
  345. "Metal Matrix Composites in the Automotive Industry - Applications, Fundamentals and Issues", Keynote at Symposium on Advanced Aerospace Materials, Pohang Institute of Science and Technology, Pohang, Korea, November 1991.
  346. "Potential Applications of Titanium Alloys in Production Automobiles", with A. M. Sherman, presented at WESTEC '90, Los Angeles, CA, March 1990.
  347. "Opportunities and Challenges for MMCs in the Automotive Industry", presented at 17th Annual TMS Detroit Section Automotive Materials Symposium, Ann Arbor, MI, May 1990.
  348. "Mechanical Behavior of Elevated Temperature Titanium Alloys", with J. W. Jones, TMS-AIME Annual Meeting, Las Vegas, NV, February 1989.
  349. "Creep Behavior of Rapidly Solidified Aluminum Alloys", with S. Claeys and J. W. Jones, presented at ASTM Annual Meeting, Kansas City, MO, May 1989.
  350. "Potential Applications for Unconventional Materials", presented at "Automotive Materials in the 1990s", Metalworking News and American Metal Market, Dearborn, MI, December 1989.
  351. "Powder Metallurgy Titanium - Current Status and Automo­tive Opportuni­ties", with F. H. Froe and A. M. Sherman, presented at SAE Annual Meeting, Detroit, MI, March 1988.
  352. "Structures and Properties of Elevated Temperature Tita­nium Alloys" USAF Materials Laboratory, WPAFB, OH, May 1988.
  353. "Fatigue Behavior of Aluminum-based Metal Matrix Compos­ites", with C. P. You, J. J. Bonnen and J. W. Jones, presented at ASTM Workshop on Fatigue Testing of Advanced Materials, Atlanta, GA, November 1988.
  354. "The Influence of Microstructure on Fatigue Crack Clo­sure", ASTM E-24 Workshop on Crack Closure and Small Crack Effects, Atlan­ta, GA, November 1988.
  355. "Opportunities for Discontinuous Metal Matrix Composites in the Automotive Industry", with A. M. Sherman, presented at 9th Annual Meeting of Discontinuous Metal Matrix Composites Working Group, Park City, Utah, January 1987.
  356. "Room Temperature Fatigue Crack Growth in a and a/ß Titanium Alloys", with J.C. Chesnutt, J.C. Williams, and A.W. Thompson, TMS-AIME Annual Meeting, Denver, CO, February 1987.
  357. "Trends for Metal Matrix Composites in the Automotive Industry", with  A. M. Sherman presented at SAE Annual Meeting, Detroit, MI, February, 1987.
  358. "The Development of a Titanium Engine Valve System", with A.M. Sherman, presented at Automotive Materials Symposium (TMS-AIME), Ann Arbor, MI, April 1986.
  359. "The Use of Titanium in Engine Valve Trains", with A. M. Sherman, presented at TDA International Symposium on Titanium Products and Applications, San Francisco, CA, October 1986.
  360. "The Potential for Light-Weight, Rapidly Solidified Metals in the Automotive Industry", with A. M. Sherman, presented at DARPA/NSF Conference on Rapid Solidification Processing: Principles and Technolo­gies, Santa Barbara, CA, December 1986.
  361. "Fatigue Closure During Fatigue Crack Growth ‑ The Inter­action of Mechanics and Materials", Mechanics and Materials Seminar Series, University of Illinois, Champaign, Illinois, May 1985.
  362. "Fatigue Crack Growth in Titanium Alloys", German Federal Aeronautical Research Labora­tories (DFVLR), Cologne, W. Germany, November 1983.