University of Michigan

Michigan Engineering

Skip to content. Skip to navigation

Materials Science and Engineering, University of Michigan

  MSE / People / Faculty / J. Wayne Jones

Articles

  1. Saddock, ND; Suzuki, A; Wu, K; Wildy, SC; Change, YA; Pollock, TM; Jones, JW, "Solidification and Microstructure of Mg - Al - (Ca, Sr, Ce, La) Ternary Alloys ," Magnesium Technology 2005, pp. 121-126 (2005).
  2. Shyam, A; Allison, JE; Jones, JW, "A Small Fatigue Crack Growth Relationship And Its Application To Cast Aluminum," Acta Materialia, Vol. 53, Issue 5, pp. 1499 (2005). link
  3. Shyam, A; Allison, JE; Jones, JW, "Modeling Small Fatigue Crack Growth in Cast Aluminum Alloys," Proceedings of 11th International Conference on Fracture (ICF 11), (2005).
  4. Shyam, A; Torbet, CJ; Jha, SK; Larsen, JM; Caton, MJ; Szczepanski, CJ; Pollock, TM; Jones, JW, "Development of ultrasonic fatigue for rapid high temperature fatigue studies in turbine engine materials," Materials Damage Prognosis, pp. 247-252 (2005).
  5. Suzuki, A; Saddock, ND; Jones, JW; Pollock, TM, "Solidification Paths And Eutectic Intermetallic Phases In Mg-Al-Ca Ternary Alloys," Acta Materialia, Vol. 53, Issue 9, pp. 2823 (2005). link
  6. Suzuki, A; Saddock, ND; Jones, JW; Pollock, TM, "Phase Transformation and Creep of Mg-AI-Ca Based Die-Cast Alloys," Magnesium Technology 2005, pp. 111-116 (2005).
  7. Szczepanski, CJ; Shyam, A; Jha, SK; Larsen, JM; Torbet, CJ; Johnson, SJ; Jones, JW, "Characterization of the role of microstructure on the fatigue life of Ti-6Al-2Sn-4Zr-6Mo using ultrasonic fatigue," Materials Damage Prognosis, pp. 315-320 (2005).
  8. Chadha, G; Allison, JE; Jones, JW, "The role of microstructure and porosity in ductility of die cast AM50 and AM60 magnesium alloys," Magnesium Technology 2004, pp. 181-186 (2004).
  9. Moore, A R; Torbet, C J; Shyam, A; Jones, J W; Walukas, D M; Decker, R F, "Fatigue behavior of thixomolded magnesium AZ91D using ultrasonic techniques," Magnesium Technology 2004, pp. 263-268 (2004).
  10. Shyam, A; Picard, YN; Jones, JW; Allison, JE; Yalisove, SM, "Small Fatigue Crack Propagation From Micronotches In The Cast Aluminum Alloy W319," Scripta Materialia, Vol. 50, Issue 8, pp. 1109 (2004). link
  11. Shyam, A; Torbet, CJ; Jha, SK; Larsen, JM; Caton, MJ; Szczepanski, CJ; Pollock, TM; Jones, JW, "Development of Ultrasonic Fatigue for Rapid, High Temperature Fatigue Studies in Turbine Engine Materials," Superalloys 2004, pp. 259-268 (2004).
  12. Suzuki, A; Saddock, ND; Jones, JW; Pollock, TM, "Structure And Transition Of Eutectic (Mg,Al)(2)Ca Laves Phase In A Die-Cast Mg-Al-Ca Base Alloy," Scripta Materialia, Vol. 51, Issue 10, pp. 1005 (2004). link
  13. Weakley-Bollin, SC; Donlon, W; Wolverton, C; Jones, JW; Allison, JE, "Modeling The Age-Hardening Behavior Of Al-Si-Cu Alloys," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 35a, Issue 8, pp. 2407 (2004). link
  14. Zhu, X; Shyam, A; Jones, JW; Mayer, H; Lasecki, JV; Allison JE, "Elevated temperature fatigue behavior of a 319 cast aluminum alloy in the gigacycle regime," Proceedings, Third International Conference on Very High Cycle Fatigue (VHCF-3), pp. 553-560 (2004).
  15. Caton, MJ; Jones, JW; Mayer, H; Stanzl-Tschegg, S; Allison, JE, "Demonstration Of An Endurance Limit In Cast 319 Aluminum," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 34, Issue 1, pp. 33 (2003). link
  16. Chadha, G; Wu, A; Chen, Q; Jones, JW; Pollock, TM; De Graef, M, "In-situ and Ex-situ Surface Displacement Measurements," Proc. Soc. Experimental Mechanics, (2003).
  17. Moreno, IP; Nandy, TK; Jones, JW; Allison, JE; Pollock, TM, "Microstructural Stability And Creep Of Rare-Earth Containing Magnesium Alloys," Scripta Materialia, Vol. 48, Issue 8, pp. 1029 (2003). link
  18. Nandy, TK; Jones, JW; Pollock, TM; Walukas, DM; Decker, RF, "Blended Magnesium Alloys Produced by the Thixomolding Process ," Metallurgical and Materials Transactions A, Vol. 34A, Issue 1, pp. 33-41 (2003).
  19. Moreno, IP; Nandy, TK; Jones, JW; Allison, JE; Pollock, TM, "Microstructure and creep behavior of a die cast magnesium-rare earth alloy," Magnesium Technology 2002, pp. 111-116 (2002).
  20. Caton, MJ; Jones, JW; Allison, JE, "The Influence Of Heat Treatment And Solidification Time On The Behavior Of Small-Fatigue-Cracks In A Cast Aluminum Alloy," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 314, Issue 1-2, pp. 81 (2001). link
  21. Harding, TS; Jones, JW, "Evaluation Of A Threshold-Based Model Of The Elevated-Temperature Fatigue Of Impact-Damaged Gamma-Tial," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 32, Issue 12, pp. 2975 (2001). link
  22. Moreno, I P; Allison, J E; Jones, J W, "Creep and bolt-load retention behavior of a die cast Mg-rare earth alloy," Magnesium Technology 2001, pp. 145 (2001).
  23. Moreno, IP; Nandy, TK; Jones, JW; Allison, JE; Pollock, TM, "Microstructural Characterization Of A Die-Cast Magnesium-Rare Earth Alloy," Scripta Materialia, Vol. 45, Issue 12, pp. 1423 (2001). link
  24. Smith, R; Harding, T; Jones, JW; Steif, P; Pollock, TM, "The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys," Structural Intermetallics 2001, pp. 259-268 (2001).
  25. Steif, PS; McKenna, VT; Jones, JW; Smith, R; Harding, T; Gilchrist, A, " Accounting for small particle impact in the design of gamma -TiAl turbine blades ," Structural Intermetallics 2001, pp. 363-370 (2001).
  26. Caton, MJ; Jones, JW; Allison, JE, "Use of a Small-Crack Fracture Mechanics-Based Model for Predicting the S-N Response of Cast Aluminum Alloys," Fatigue Crack Growth Thresholds, Endurance Limits, and Design, pp. 285-303 (2000).
  27. Chawla, N; Andes, C; Davis, LC; Allison, JE; Jones, JW, "The interactive role of inclusions and SiC reinforcement on the high-cycle fatigue resistance of particle reinforced metal matrix composites," Metallurgical and Materials Transactions A, Vol. 31A, Issue 3A, pp. 951 (2000). link
  28. Chawla, N; Habel, U; Shen, Y-L; Andres, C; Jones, J W; Allison, J E, "The effect of matrix microstructure on the tensile and fatigue behavior of SiC particle-reinforced 2080 Al matrix composites," Metallurgical and Materials Transactions A, Vol. 31A, Issue 2, pp. 531 (2000). link
  29. Cloutier, C; Jones, JW; Allison, JE, "The Effect of Copper Level and Solidification Rate on the Aging Behavior of a 319-Type Cast Aluminum Alloy," SAE International, (2000).
  30. Harding, TS; Jones, JW, "The Effect Of Impact Damage On The Room-Temperature Fatigue Behavior Of Gamma-Tial," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 31, Issue 7, pp. 1741 (2000). link
  31. Harding, TS; Jones, JW, "Fatigue Thresholds Of Cracks Resulting From Impact Damage To Gamma-Tial," Scripta Materialia, Vol. 43, Issue 7, pp. 623 (2000). link
  32. Harding, TS; Jones, JW, "Effect Of Foreign Object Damage On The Fatigue Strength Of An Xd (Tm) Gamma-Tial Alloy," Scripta Materialia, Vol. 43, Issue 7, pp. 631 (2000). link
  33. Caton, M; Jones J; Allison, J, "A Study of Small Fatigue Crack Growth in Cast Aluminum and Prediction of Fatigue Properties," Small Fatigue Cracks: Mechanics, Mechanisms and Applications, pp. 155-166 (1999).
  34. Caton, MJ; Jones, JW; Boileau, JM; Allison, JE, "The Effect Of Solidification Rate On The Growth Of Small Fatigue Cracks In A Cast 319-Type Aluminum Alloy," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 30, Issue 12, pp. 3055 (1999).
  35. Chawla, N; Jones, JW; Allison, JE, "Elevated temperature tensile and fatigue behavior of particle reinforced metal matrix composites," Fatigue '99: Seventh International Fatigue Congress, pp. 1465-1470 (1999).
  36. Cloutier, C; Reeber-Schmansky, P; Jones JW; Allison, JE, "A Process Model for the Age Hardening of a 319-Type Aluminum Alloy," Automotive Alloys III, (1999).
  37. Harding, TS; Jones, JW, "Behavior Of Gamma Tial Subjected To Impact Damage And Elevated Temperature Fatigue," Scripta Materialia, Vol. 42, Issue 2, pp. 129 (1999). link
  38. Harding, TS; Jones, JW; Larsen, JM; Steif, PS, " Influence of impact damage on the elevated temperature fatigue behavior of gamma titanium aluminide alloys," Second International Symposium on Gamma Titanium Aluminides (ISGTA) 1999, pp. 527-534 (1999).
  39. Harding, TS; Jones, JW; Steif, PS; Pollock, TM, "Room Temperature Fatigue Response Of Gamma-Tial To Impact Damage," Scripta Materialia, Vol. 40, Issue 4, pp. 445 (1999). link
  40. Chawla, N; Andres, C; Jones, JW; Allison, JE, "Effect Of SiC Volume Fraction And Particle Size On The Fatigue Resistance Of A 2080 Al/Sicp Composite," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 29, Issue 11, pp. 2843 (1998). link
  41. Chawla, N; Andres, C; Jones, JW; Allison, JE, "Cyclic Stress-Strain Behavior Of Particle Reinforced Metal Matrix Composites," Scripta Materialia, Vol. 38, Issue 10, pp. 1595 (1998). link
  42. Harding, T; Jones, JW; Pollock, TM; Steif, PS, "The Effects of Impact Damage on the Fatigue Properties of Gamma TiAl," Proc. of the Paris Symp. on Fatigue of Structural Materials, pp. 499 (1998).
  43. Sohn, KY; Yurko, JA; Chen, FC; Jones, JW; Allison, JE, "Creep and bolt-load retention behavior of die-cast magnesium alloys ," Automotive Alloys II, pp. 81-90 (1998).
  44. Sohn, KY; Yurko, JA; Jones, JW; Kearns, FE; Allison, JE, "Bolt Load Retention Behavior of Die-Cast AZ91D and AE42 Magnesium," SAE Paper 80090, (1998).
  45. Harding, TS; Jones, JW; Pollock, TM; Steif, PS; Rubal, MP, "Impact damage and fatigue behavior of gamma TiAl," High Cycle Fatigue of Structural Materials, pp. 499-511 (1997).
  46. Steif, PS; Jones, JW; Harding, T; Rubal, MP; Gandelsman, VZ; Biery, N; Pollock, TM, "Surface damage due to impact and fatigue strength reduction in gamma titanium aluminides," Structural Intermetallics 1997, pp. 435 (1997).
Personal tools