University of Michigan

Michigan Engineering

Skip to content. Skip to navigation

Materials Science and Engineering, University of Michigan

  MSE / People / Faculty / William Hosford

Books

  1. W.F. Hosford, "Intermediate Materials Science," Cambridge University Press, pp. 237 pgs (2007).
  2. W.F. Hosford; R.M. Caddell, "Metal Forming: Mechanics and Metallurgy, Third Edition," Prentice-Hall, pp. 330 pgs (2007).
  3. W.F. Hosford, "Mechanical Behavior of Materials," Cambridge University Press, pp. 425 pgs (2005).
  4. W.F. Hosford, "Physical Metallurgy," Taylor & Francis, pp. 496 pgs (2005).
  5. W.F. Hosford, "The Mechanics of Crystals and Textured Polycrystals," Oxford University, pp. 248 pgs (1993).

Articles

  1. Hosford, W.F., "A Brick-Wall Model for Calculating Young's Modulus of a Particulate Composite," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 35a, Issue 7, pp. 2191 (2004). link
  2. Hosford, W.F., "Anisotropy of Aluminum and Aluminum Alloys," Journal of the Minerals Metals & Materials Society, Issue May, pp. 62-72 (2002).
  3. O'Brien, J.M.; Hosford, W.F., "Spheroidization Cycles for Medium Carbon Steels," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 33, Issue 4, pp. 1255 (2002). link
  4. Hosford, W.F.; Duncan, J.L., "Sheet Metal Forming: A Review," Jom-Journal Of The Minerals Metals & Materials Society, Vol. 51, Issue 11, pp. 39 (1999).
  5. Hosford, W.F., "Reflections on The Dependence of Plastic Anisotropy on Texture," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 257, Issue 1, pp. 1 (1998). link
  6. O'Brien, J.M.; Hosford, W.F., "Spheroidization of Medium-Carbon Steels," Journal Of Materials Engineering And Performance, Vol. 6, Issue 1, pp. 69 (1997).
  7. Hosford, W.F.; Duncan, J.L., "The Aluminum Beverage Can," Scientific American, Vol. 271, Issue 3, pp. 48 (1994).
  8. Graf, A.F.; Hosford, W.F., "Calculations of Forming Limit Diagrams For Changing Strain Paths," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 24, Issue 11, pp. 2497 (1993).
  9. Hosford, W.F., "Myths And Oversimplifications In Materials Science," Jom-Journal Of The Minerals Metals & Materials Society, Vol. 45, Issue 3, pp. 54 (1993).
  10. A. Galdos; Hosford, W.F., "Lower-Bound Yield Locus Calculations," Textures and Microstructures, Vol. 12, pp. 85-101 (1990).
  11. Graf, A.F.; Hosford, W.F., "Calculations of Forming Limit Diagrams," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 21, Issue 1, pp. 87 (1990).
  12. Krause, S.I.; Hosford, W.F., "Texture Development in Polyethylene .1. Uniaxial Extension and Uniaxial Compression," Journal Of Polymer Science Part B-Polymer Physics, Vol. 27, Issue 9, pp. 1853 (1989).
  13. Krause, S.I.; Hosford, W.F., "Texture Development in Polyethylene .2. Unidirectional Rolling," Journal Of Polymer Science Part B-Polymer Physics, Vol. 27, Issue 9, pp. 1867 (1989).
  14. Zhu, Y; Dodd, B; Caddell, R.M.; Hosford, W.F., "Convexity Restrictions On Non-Quadratic Anisotropic Yield Criteria," International Journal Of Mechanical Sciences, Vol. 29, Issue 10-11, pp. 733 (1987).
  15. Jun, G; Hosford, W.F., "Flow Behavior of an Aluminum-Killed Steel After Tensile Prestraining and Strain-Aging," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 17, Issue 9, pp. 1573 (1986).
  16. Hosford, W.F., "Comments on Anisotropic Yield Criteria," International Journal Of Mechanical Sciences, Vol. 27, Issue 7-8, pp. 423 (1985).
  17. Kobayashi, S; Caddell, R.M.; Hosford, W.F., "Examination of Hill Latest Yield Criterion Using Experimental-Data for Various Anisotropic Sheet Metals," International Journal Of Mechanical Sciences, Vol. 27, Issue 7-8, pp. 509 (1985).
  18. Vial, C; Hosford, W.F.; Caddell, R.M., "Yield Loci of Anisotropic Sheet Metals," International Journal Of Mechanical Sciences, Vol. 25, Issue 12, pp. 899 (1983).
  19. Kim, C; Biss, V; Hosford, W.F., "A New Procedure For Determining Volume Fraction of Primary Carbides in High-Speed and Related Tool Steels," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 13, Issue 2, pp. 185 (1982).
  20. Kim, C; Johnson, A.R.; Hosford, W.F., "Fracture-Toughness of AISI-M2 High-Speed Steel and Corresponding Matrix Tool Steel," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 13, Issue 9, pp. 1595 (1982).
  21. Mardinly, A.I.; Hosford, W.F.; Vanvlack, L.H., "Microstructure and Crystallography of Deformed Manganese Sulfide Inclusions in Steel," American Ceramic Society Bulletin, Vol. 60, Issue 8, pp. 857 (1981).
  22. Mardinly, A.I.; Vanvlack, L.H.; Hosford, W.F., "Microstructure and Crystallography of Deformed Manganese Sulfide Inclusions in Steel," Journal Of Metals, Vol. 33, Issue 9, pp. A50 (1981).
  23. Logan, R.W.; Hosford, W.F., "Upper-Bound Anisotropic Yield Locus Calculations Assuming (111)-Pencil Glide," International Journal Of Mechanical Sciences, Vol. 22, Issue 7, pp. 419 (1980).
  24. Agrawal, S.P.; Hosford, W.F., "Anisotropy of Ai-4 Wt Pct Cu Single-Crystals Tested In Plane-Strain Compression," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 7, Issue 12, pp. 1867 (1976).
  25. Hosford, W.F.; Agrawal, S.P., "Effect of Stress During Aging on Precipitation of Theta' in Al-4 Wt Pct Cu," Metallurgical Transactions, Vol. A 6, Issue 3, pp. 487 (1975).
  26. Hosford, W.F., "Yield Locus of Random-Textured FCC Metals Calculated with Lower-Bound Assumptions," Metallurgical Transactions, Vol. 5, Issue 1, pp. 307 (1974).
  27. Hosford, W.F., "Yield Locus of Randomly Oriented FCC Metals According to Bishop-Hill Theory," Metallurgical Transactions, Vol. 4, Issue 5, pp. 1416 (1973).
  28. Hosford, W.F.; Allen, T.I., "Twinning And Directional Slip as a Cause for a Strength Differential Effect," Metallurgical Transactions, Vol. 4, Issue 5, pp. 1424 (1973).
Personal tools