University of Michigan

Michigan Engineering

Skip to content. Skip to navigation

Materials Science and Engineering, University of Michigan

  MSE / People / Faculty / Amit Ghosh

Articles

  1. Ghosh, A.K. and Yang, Q. , "Production of ultrafine-grain microstructure in Mg alloy by alternate biaxial reverse corrugation," Acta Materialia, Vol. 54, Issue 19, pp. 5147-58 (2006). link
  2. Q. Yang and A.K. Ghosh, "Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature," Acta Materialia, Vol. 54, Issue 19, pp. 5159-5170 (2006). link
  3. Yi Liu, and Amit K. Ghosh, "Microstructural Evolution during Severe Deformation of AZ31 Magnesium Alloy under Non-isothermal Processing Conditions," Mgnesium Technology, TMS, pp. 139-144 (2005).
  4. Lee, Ig; Ghosh, Ak, "High Temperature Deformation Mechanism Maps Of Nial," Designing, Processing And Properties Of Advanced Engineering Materials, Pts 1 And 2, Vol. 449-4, pp. 57 (2004).
  5. Li, Dm; Ghosh, Ak, "Effects Of Temperature And Blank Holding Force On Biaxial Forming Behavior Of Aluminum Sheet Alloys," Journal Of Materials Engineering And Performance, Vol. 13, Issue 3, pp. 348 (2004).
  6. Li, Dm; Ghosh, Ak, "Biaxial Warm Forming Behavior Of Aluminum Sheet Alloys," Journal Of Materials Processing Technology, Vol. 145, Issue 3, pp. 281 (2004). link
  7. Nicolaou, Pd; Semiatin, Sl; Ghosh, Ak, "The Dependence Of Cavity-Growth Rate On Stress Triaxiality," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 35a, Issue 7, pp. 2187 (2004). link
  8. Oruganti, Rk; Ghosh, Ak; Mazumder, J, "Thermal Expansion Behavior In Fabricated Cellular Structures," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 371, Issue 1-2, pp. 24 (2004). link
  9. Bae, Dh; Ghosh, Ak, "A Planar Simple Shear Test And Flow Behavior In A Superplastic Al-Mg Alloy," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 34a, Issue 11, pp. 2465 (2003). link
  10. Bae, Dh; Ghosh, Ak; Bradley, Jr, "Stress-State Dependence Of Cavitation And Flow Behavior In Superplastic Aluminum Alloys," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 34a, Issue 11, pp. 2449 (2003). link
  11. Cleveland, Rm; Ghosh, Ak; Bradley, Jr, "Comparison Of Superplastic Behavior In Two 5083 Aluminum Alloys," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 351, Issue 1-2, pp. 228 (2003). link
  12. Luo, Lm; Ghosh, Ak, "Elastic And Inelastic Recovery After Plastic Deformation Of Dqsk Steel Sheet," Journal Of Engineering Materials And Technology-Transactions Of The Asme, Vol. 125, Issue 3, pp. 237 (2003). link
  13. Oruganti, Rk; Ghosh, Ak, "The Fabrication And Creep Properties Of Superalloy-Zirconia Composites," Jom-Journal Of The Minerals Metals & Materials Society, Vol. 55, Issue 1, pp. 21 (2003).
  14. Oruganti, Rk; Ghosh, Ak, "Fabrication And Creep Properties Of Superalloy-Zirconia Composites," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 34a, Issue 11, pp. 2643 (2003). link
  15. Bae, Dh; Ghosh, Ak, "Cavity Formation And Early Growth In A Superplastic Al-Mg Alloy," Acta Materialia, Vol. 50, Issue 3, pp. 511 (2002). link
  16. Bae, Dh; Ghosh, Ak, "Cavity Growth During Superplastic Flow In An Al-Mg Alloy: I. Experimental Study," Acta Materialia, Vol. 50, Issue 5, pp. 993 (2002). link
  17. Bae, Dh; Ghosh, Ak, "Cavity Growth In A Superplastic Al-Mg Alloy: Ii. An Improved Plasticity Based Model," Acta Materialia, Vol. 50, Issue 5, pp. 1011 (2002). link
  18. Bae, Dh; Ghosh, Ak, "Observations Related To Healing Of Interface Damage And Cavity Nucleation During Superplastic Flow," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 322, Issue 1-2, pp. 233 (2002). link
  19. Cleveland, Rm; Ghosh, Ak, "Inelastic Effects On Springback In Metals," International Journal Of Plasticity, Vol. 18, Issue 5-6, pp. 769 (2002). link
  20. Medeiros, Sc; Ghosh, Ak, "Microstructural And Deformation Characteristics Of A Laminated Amorphous/Nanocrystalline Alloy, Zr67nb6cu14ni10al3," Metastable, Mechanically Alloyed And Nanocrystalline Materials, Vol. 386-3, pp. 547 (2002).
  21. Purushotham, S; Ghosh, Ak, "Nanocrystalline Al-Based Alloys For Elevated Temperature Applications," Metastable, Mechanically Alloyed And Nanocrystalline Materials, Vol. 386-3, pp. 565 (2002).
  22. Fox, Mr; Ghosh, Ak, "Role Of Large-Scale Slip In Mode Ii Fracture Of Bimaterial Interface Produced By Diffusion Bonding," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 32, Issue 8, pp. 2109 (2001). link
  23. Ghosh, Ak, "Glide-Climb Based Gbs Model Applied To Submicrocrystalline Superplasticity," Superplasticity In Advanced Materials, Icsam-2000, Vol. 357-3, pp. 237 (2001).
  24. Lombard, Cm; Ghosh, Ak; Semiatin, Sl, "An Analysis Of Cavitation Occurring In Near-Gamma Titanium Aluminide During Superplastic Deformation," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 32, Issue 11, pp. 2769 (2001). link
  25. Tong, Xc; Ghosh, Ak, "Fabrication Of In Situ Tic Reinforced Aluminum Matrix Composites," Journal Of Materials Science, Vol. 36, Issue 16, pp. 4059 (2001). link
  26. Bae, Dh; Ghosh, Ak, "Grain Size And Temperature Dependence Of Superplastic Deformation In An Al-Mg Alloy Under Isostructural Condition," Acta Materialia, Vol. 48, Issue 6, pp. 1207 (2000). link
  27. Nicolaou, Pd; Semiatin, Sl; Ghosh, Ak, "An Analysis Of The Effect Of Cavity Nucleation Rate And Cavity Coalescence On The Tensile Behavior Of Superplastic Materials," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 31, Issue 5, pp. 1425 (2000). link
  28. Fox, Mr; Ghosh, Ak, "Structure, Strength And Fracture Resistance Of Interfaces In Nial/Mo Model Laminates," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 259, Issue 2, pp. 261 (1999). link
  29. Ghosh, Ak; Bae, Dh; Semiatin, Sl, "Initiation And Early Stages Of Cavity Growth During Superplastic And Hot Deformation," Towards Innovation In Superplasticity Ii, Vol. 304-3, pp. 609 (1999).
  30. Semiatin, Sl; Goetz, Rl; Shell, Eb; Seetharaman, V; Ghosh, Ak, "Cavitation And Failure During Hot Forging Of Ti-6al-4v," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 30, Issue 5, pp. 1411 (1999). link
  31. Semiatin, Sl; Seetharaman, V; Ghosh, Ak, "Plastic Flow, Microstructure Evolution, And Defect Formation During Primary Hot Working Of Titanium And Titanium Aluminide Alloys With Lamellar Colony Microstructures," Philosophical Transactions Of The Royal Society Of London Series A-Mathematical Physical And Enginee, Vol. 357, Issue 1756, pp. 1487 (1999).
  32. Semiatin, Sl; Seetharaman, V; Ghosh, Ak; Shell, Eb; Simon, Mp; Fagin, Pn, "Cavitation During Hot Tension Testing Of Ti-6a1-4v," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 256, Issue 1-2, pp. 92 (1998). link
  33. Ghosh, Ak; Bae, Dh, "Microstructural Effects On Cavitation, Flow Localization And Fracture In Superplastic Metals," Superplasticity In Advanced Materials - Icsam-97, Vol. 243-, pp. 89 (1997).
  34. Li, F; Bae, Dh; Ghosh, Ak, "Grain Elongation And Anisotropic Grain Growth During Superplastic Deformation In An Al-Mg-Mn-Cu Alloy," Acta Materialia, Vol. 45, Issue 9, pp. 3887 (1997). link
  35. Pickard, Sm; Zhang, H; Ghosh, Ak, "Interface Shear Properties And Toughness Of Nial/Mo Laminates," Acta Materialia, Vol. 45, Issue 10, pp. 4333 (1997). link
  36. Friedman, Pa; Ghosh, Ak, "Control Of Superplastic Deformation Rate During Uniaxial Tensile Tests," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 27, Issue 10, pp. 3030 (1996).
  37. Friedman, Pa; Ghosh, Ak, "Microstructural Evolution And Superplastic Deformation Behavior Of Fine Grain 5083al," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 27, Issue 12, pp. 3827 (1996).
  38. Li, F; Ghosh, Ak, "Anisotropy Of Dynamic Grain Growth In A Superplastic Aluminum-Magnesium Alloy," Aluminium Alloys: Their Physical And Mechanical Properties, Pts 1-3, Vol. 217, pp. 535 (1996).
  39. Pickard, Sm; Ghosh, Ak, "Bridge Toughening Enhancement In Double-Notched Mosi2/Nb Model Composites," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 27, Issue 4, pp. 909 (1996).
  40. Verma, R; Friedman, Pa; Ghosh, Ak; Kim, S; Kim, C, "Characterization Of Superplastic Deformation Behavior Of A Fine Grain 5083 Al Alloy Sheet," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 27, Issue 7, pp. 1889 (1996).
  41. Verma, R; Friedman, Pa; Ghosh, Ak; Kim, C; Kim, S, "Superplastic Forming Characteristics Of Fine-Grained 5083-Aluminum," Journal Of Materials Engineering And Performance, Vol. 4, Issue 5, pp. 543 (1995).
  42. Verma, R; Ghosh, Ak; Kim, S; Kim, C, "Grain-Refinement And Superplasticity In 5083-Al," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 191, Issue 1-2, pp. 143 (1995). link
  43. Verma, R; Ghosh, Ak; Merrick, H; Mukherji, T, "Measurement Of Interfacial Shear Properties Of Composites Of Ti-1100 Alloy Reinforced With Scs-6 Sic Monofilament Fiber," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 191, Issue 1-2, pp. 151 (1995). link
  44. Lee, Ig; Ghosh, Ak; Ray, R; Jha, S, "High-Temperature Deformation Of B2 Nial-Base Alloys," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 25, Issue 9, pp. 2017 (1994).
  45. Makhlouf, K; Ghosh, Ak; Ray, R, "Deformation-Behavior Of Gamma-Tial Composites In The Solid And Mushy States," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 184, Issue 1, pp. 17 (1994). link
  46. Syu, Dgc; Ghosh, Ak, "The Effect Of Temperature On The Fracture Mechanism In 2014al/15vol-Percent-Al2o3 Composite," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 184, Issue 1, pp. 27 (1994). link
  47. Syu, Dgc; Ghosh, Ak, "Forging Limits For An Aluminum-Matrix Composite .1. Experimental Results," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 25, Issue 9, pp. 2027 (1994).
  48. Syu, Dgc; Ghosh, Ak, "Forging Limits For An Aluminum-Matrix Composite .2. Analysis," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 25, Issue 9, pp. 2039 (1994).
  49. Syu, Dgc; Ghosh, Ak, "Stress-State Dependence Of Strain-Hardening Behavior In 2014-Al/15 Vol-Pct Al2o3 Composite," Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol. 25, Issue 9, pp. 2049 (1994).
  50. Wu, X; Holmes, Jw; Ghosh, Ak, "Creep And Fracture In Model Niobium-Alumina Laminates Under Shear Loading," Acta Metallurgica Et Materialia, Vol. 42, Issue 6, pp. 2069 (1994). link
  51. Gibala, R; Ghosh, Ak; Vanaken, Dc; Srolovitz, Dj; Basu, A; Chang, H; Mason, Dp; Yang, W, "Mechanical-Behavior And Interface Design Of Mosi2-Based Alloys And Composites," Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 155, Issue 1-2, pp. 147 (1992).
  52. Chan, Ks; Koss, Da; Ghosh, Ak, "Localized Necking Of Sheet At Negative Minor Strains," Metallurgical Transactions A-Physical Metallurgy And Materials Science, Vol. 15, Issue 2, pp. 323 (1984).
  53. Chan, Ks; Ghosh, Ak; Koss, Da, "Localized Necking - An Inclined Imperfection Model," Journal Of Metals, Vol. 33, Issue 9, pp. A21 (1981).
  54. Chan, Ks; Koss, Da; Ghosh, Ak, "The Deformation-Behavior Of Strongly Textured Titanium-Alloy Sheet," Journal Of Metals, Vol. 32, Issue 8, pp. 69 (1980).
Personal tools