University of Michigan

Michigan Engineering

Skip to content. Skip to navigation

Materials Science and Engineering, University of Michigan

  MSE / People / Faculty / Michael Atzmon

Articles

  1. Jiang, WH; Atzmon, M, "Mechanical strength of nanocrystalline/amorphous Al90Fe5Gd5 composites produced by rolling," Appl. Phys. Lett., Vol. 86, Issue 15, (2005). link
  2. Jiang, WH; Pinkerton, FE; Atzmon, M, "Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy," Acta Mater., Vol. 53, Issue 12, pp. 3469 (2005). link
  3. Jiang, WH; Pinkerton, FE; Atzmon, M, "Deformation-induced nanocrystallization: A comparison of two amorphous Al-based alloys," J. Mater. Res., Vol. 20, Issue 3, pp. 696 (2005).
  4. Zu, XT; Sun, K; Atzmon, M; Wang, LM; You, LP; Wan, FR; Busby, JT; Was, GS; Adamson, RB, "Effect of proton and Ne irradiation on the microstructure of Zircaloy 4," Philos. Mag., Vol. 85, Issue 4-7, pp. 649 (2005).
  5. Jang, D; Atzmon, M, "Grain-size dependence of plastic deformation in nanocrystalline Fe," J. Appl. Phys., Vol. 93, Issue 11, pp. 9282 (2003). link
  6. Jiang, WH; Atzmon, M, "The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5 : a high-resolution transmission electron microscopy study," Acta Mater., Vol. 51, Issue 14, pp. 4095 (2003). link
  7. Jiang, WH; Atzmon, M, "Rate dependence of serrated flow in a metallic glass," J. Mater. Res., Vol. 18, Issue 4, pp. 755 (2003).
  8. Jiang, WH; Pinkerton, FE; Atzmon, M, "Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation," J. Appl. Phys., Vol. 93, Issue 11, pp. 9287 (2003). link
  9. Jiang, WH; Pinkerton, FE; Atzmon, M, "Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperature," Scr. Mater., Vol. 48, Issue 8, pp. 1195 (2003). link
  10. Boyer, WSL; Atzmon, M, "Interdependence of stress and interdiffusion during solid-state amorphization in Ni-Hf," J. Mater. Res., Vol. 15, Issue 2, pp. 463 (2000).
  11. Tian, HH; Atzmon, M, "Non-monotonic decomposition in the immiscible Ag-Cu system," , Vol. 343-3, pp. 284 (2000).
  12. Tian, HH; Atzmon, M, "Kinetics of microstructure evolution in nanocrystalline Fe powder during mechanical attrition," Acta Mater., Vol. 47, Issue 4, pp. 1255 (1999).
  13. Tian, HH; Atzmon, M, "Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materials," Philos. Mag. A-Phys. Condens. Matter Struct. Defect Mech. Prop., Vol. 79, Issue 8, pp. 1769 (1999). link
  14. Was, GS; Allen, TR; Busby, JT; Gan, J; Damcott, D; Carter, D; Atzmon, M; Kenik, EA, "Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core components," J. Nucl. Mater., Vol. 270, Issue 1-2, pp. 96 (1999).
  15. Xu, J; Collins, GS; Peng, LSJ; Atzmon, M, "Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball milling," Acta Mater., Vol. 47, Issue 4, pp. 1241 (1999). link
  16. Xu, J; Atzmon, M, "Temperature dependence of deformation-assisted crystallization in amorphous Fe-78 B13Sig," Appl. Phys. Lett., Vol. 73, Issue 13, pp. 1805 (1998). link
  17. Cookson, JM; Was, GS; Allen, TR; Atzmon, M; Carter, RD; Damcott, DL; Gan, J, "The effects of preferential sputtering phenomenon on SSRT test of AISI304 stainless steel - Comment," Scr. Mater., Vol. 34, Issue 5, pp. 839 (1996). link
  18. Goodrich, DM; Atzmon, M, "Microstructural evolution in ball-milled iron powder," , Vol. 225, pp. 223 (1996).
  19. Ma, E; Atzmon, M, "Phase-Transformations Induced By Mechanical Alloying In Binary-Systems," Mater. Chem. Phys., Vol. 39, Issue 4, pp. 249 (1995).
  20. Carter, RD; Damcott, DL; Atzmon, M; Was, GS; Bruemmer, SM; Kenik, EA, "Quantitative-Analysis of Radiation-Induced Grain-Boundary Segregation Measurements," J. Nucl. Mater., Vol. 211, Issue 1, pp. 70 (1994).
  21. Adams, CD; Srolovitz, DJ; Atzmon, M, "Monte-Carlo Simulation of Phase-Separation During Thin-Film Codeposition," J. Appl. Phys., Vol. 74, Issue 3, pp. 1707 (1993). link
  22. Boyer, WSL; Atzmon, M, "The Effect of Nonlinear Diffusion On Solid-State Amorphization In Ni-Hf - Experiment And Simulation," J. Alloy. Compd., Vol. 194, Issue 2, pp. 213 (1993).
  23. Carter, RD; Damcott, DL; Atzmon, M; Was, GS; Kenik, EA, "Effects of Proton Irradiation On The Microstructure And Microchemistry of Type-304l Stainless-Steel," J. Nucl. Mater., Vol. 205, pp. 361 (1993).
  24. Cookson, JM; Carter, RD; Damcott, DL; Atzmon, M; Was, GS, "Irradiation Assisted Stress-Corrosion Cracking of Controlled Purity 304l Stainless-Steels," J. Nucl. Mater., Vol. 202, Issue 1-2, pp. 104 (1993).
  25. Ma, E; Atzmon, M, "Enthalpies of Formation And Crystallization of Amorphous Zr1-xAlx And Zr1-xNix Alloys - Calculations Compared With Measurements," J. Alloy. Compd., Vol. 194, Issue 2, pp. 235 (1993).
  26. Ma, E; Atzmon, M; Pinkerton, FE, "Thermodynamic And Magnetic-Properties of Metastable Fexcu100-X Solid-Solutions Formed By Mechanical Alloying," J. Appl. Phys., Vol. 74, Issue 2, pp. 955 (1993).
  27. Ma, E; Pagan, J; Cranford, G; Atzmon, M, "Evidence For Self-Sustained Mosi2 Formation During Room-Temperature High-Energy Ball-Milling of Elemental Powders," J. Mater. Res., Vol. 8, Issue 8, pp. 1836 (1993).
  28. Najafabadi, R; Srolovitz, DJ; Ma, E; Atzmon, M, "Thermodynamic Properties of Metastable Ag-Cu Alloys," J. Appl. Phys., Vol. 74, Issue 5, pp. 3144 (1993). link
  29. Adams, CD; Atzmon, M; Cheng, YT; Srolovitz, DJ, "Phase-Separation During Codeposition of Al-Ge Thin-Films," J. Mater. Res., Vol. 7, Issue 3, pp. 653 (1992).
  30. Atzmon, M, "The Effect of Interfacial Diffusion-Barriers On The Ignition of Self-Sustained Reactions In Metal-Metal Diffusion Couples," , Vol. 23, Issue 1, pp. 49 (1992).
  31. Atzmon, M, "Calculation And Simulation of Chemical-Diffusion Coefficients - The Inadequacy of The Mean-Field Theory - Reply," Phys. Rev. Lett., Vol. 68, Issue 9, pp. 1439 (1992).
  32. Atzmon, M; Kessler, DA; Srolovitz, DJ, "Phase-Separation During Film Growth," J. Appl. Phys., Vol. 72, Issue 2, pp. 442 (1992).
  33. Adams, CD; Atzmon, M; Cheng, YT; Srolovitz, DJ, "Transition From Lateral To Transverse Phase-Separation During Film Codeposition," Appl. Phys. Lett., Vol. 59, Issue 20, pp. 2535 (1991). link
  34. Atzmon, M, "Characterization of Alni Formed By a Self-Sustaining Reaction During Mechanical Alloying," Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., Vol. 134, pp. 1326 (1991).
  35. Damcott, DL; Cookson, JM; Carter, RD; Martin, JR; Atzmon, M; Was, GS, "Proton-Induced Grain-Boundary Segregation In Stainless-Steel," Radiat. Eff. Defects Solids, Vol. 118, Issue 4, pp. 383 (1991).
  36. Ma, E; Atzmon, M, "Calorimetric Evidence For Polymorphous Constraints On Metastable Zr-Al Phase Formation By Mechanical Alloying," Phys. Rev. Lett., Vol. 67, Issue 9, pp. 1126 (1991).
  37. Atzmon, M, "Monte-Carlo Simulations of Spinodal Ordering And Decomposition In Compositionally Modulated Alloys," J. Mater. Res., Vol. 5, Issue 1, pp. 92 (1990).
  38. Atzmon, M, "Calculation And Simulation of Chemical-Diffusion Coefficients - The Inadequacy of The Mean-Field Theory," Phys. Rev. Lett., Vol. 65, Issue 23, pp. 2889 (1990).
  39. Atzmon, M, "Insitu Thermal Observation of Explosive Compound-Formation Reaction During Mechanical Alloying," Phys. Rev. Lett., Vol. 64, Issue 4, pp. 487 (1990).
  40. Maret, M; Chieux, P; Hicter, P; Atzmon, M; Johnson, WL, "Partial Structure Factors And Chemical Short-Range Order In Ni33Y67 And Cu33Y67 Metallic Glasses," , Vol. 17, Issue 2, pp. 315 (1987).
  41. Atzmon, M; Unruh, KM; Johnson, WL, "Formation And Characterization of Amorphous Erbium-Based Alloys Prepared By Near-Isothermal Cold-Rolling of Elemental Composites," J. Appl. Phys., Vol. 58, Issue 10, pp. 3865 (1985). link
  42. Wright, AC; Hannon, AC; Clare, AG; Sinclair, RN; Johnson, WL; Atzmon, M; Mangin, P, "A Neutron-Diffraction Investigation of The Atomic And Magnetic-Structure of Amorphous Dy7ni3," , Vol. 46, Issue C-8, pp. 299 (1985).
  43. Atzmon, M; Verhoeven, JD; Gibson, ED; Johnson, WL, "Formation And Growth of Amorphous Phases By Solid-State Reaction In Elemental Composites Prepared By Cold-Working," Appl. Phys. Lett., Vol. 45, Issue 10, pp. 1052 (1984). link
  44. Williams, A; Eckert, J; Yeh, XL; Atzmon, M; Samwer, K, "Inelastic Neutron-Scattering From Amorphous Hydride of Zr2Pd," J. Non-Cryst. Solids, Vol. 61-2, Issue JAN, pp. 643 (1984). link
  45. Wright, AC; Hannon, AC; Sinclair, RN; Johnson, WL; Atzmon, M, "The Neutron-Diffraction Double-Null Isotopic-Substitution Technique," , Vol. 14, Issue 10, pp. L201 (1984).
  46. Atzmon, M; Johnson, WL, "A Cooling Rate Dependent Structure of Amorphous (AuxCu1-x)91la9," J. Non-Cryst. Solids, Vol. 55, Issue 3, pp. 395 (1983). link
Personal tools